Portland Economic Development

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having its’ Fifth Edition now, today – February 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3
Can You Guess Where The Screenshot Below Is From – Contest #4

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for February’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


The Answer for this month’s Contest was: Just Cause 2!
[Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
Click to see Full Size
Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!

[**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

(The Game Tips And More Blog Contest Game #2018-02)

July Currently & Goals & a Meet Up!

Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

Currently July

I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

July Goals

I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

Southeastern Bloggers Meet Up!

Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

Click on any of the images below to connect with Jivey’s blog where you can RSVP.

I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
See You In The Games!

My Trip to Thailand

When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

ROOM SEVEN LEVITATION HOTEL PARIS DESIGN

SEVEN LEVITATION HOTEL PARIS

The Last weekend we were invited to spend a night in the bedroom of SEVEN LEVITATION Hotel Paris … A change of scenery, enchanting, and very pleasant … We’ve tested since the beginning of dozens of hotels – from very luxurious to the simple – but SEVEN Hotel remains one of our fondest memories in terms of wellbeing! We literally left “floating”in this room LEVITATION, amid clouds … Here, the amenities of modern life are available starting with a Nespresso coffee machine with tea and coffee and an iPod docking station to listen to your favorite music in this extraordinary place. You will also find a flat screen TV with 4 channels olfactory delight your senses!

The room of the hotel LEVITATION SEVEN is also a premium bedding, large shower – where you can shower couple – air conditioning, a desk … So comfortable!

Above a photo of the room SUSPENDED BATH offering a superb tub suspended, and below a small photo of the ABSOLUTE LEVITATION!

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

fantastic paintjob on this speedboat

http://darkdraggon.tumblr.com/page/3

Trip to Hyderabad Cont……

Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

Things considered as part of consulting process
Marketing, prospecting and selling
Proposal, budget & contract
Invoicing and receiving advance payment
Preparation / Intake

Things that are part of the consulting process but gets taken for granted
Requesting Invitation Letter to process visa
Applying for visa
Travel & Medical Insurance
Foreign Exchange
Transport to and from Airport – in your country and the country you are visiting
Travel advice regarding security, weather etc

I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and BeautyGuava has a Latin name Psidium guajava is also often described as guava and guava. The origin of the fruit is reportedly from a country where the sport of football was born, namely Brazil, and managed to get in Indonesia through trade channels in Thailand.
Guava and Guava has a sweet taste, and not infrequently there is still sour. Round shape leaves with green skin and flesh have two color variants of white and red are where there is little seed seeds can also be consumed.
Health Benefits of Guava for Health and Beauty - 1
The Nutritional Content of Guava
There are dozens of nutrients stored in guavas and in each of these nutrients plays an important role in terms of health shore up the human body and diligent person to consume.
Here are some nutrients that are embedded in Guava :
• The Water Content Is Not Small
• Contains Fiber
• Calories
• Containing Protein
• Fats
• Contain Carbohydrates
• Contain Iron
• Abu
• Containing Calcium
• Containing Phosphorus
• Contains Vitamin A (Carotene)
• Contains Vitamin C (Ascorbic Acis)
• Contains Thiamin (Vitamin B1)
• Contains Vitamin B2 (Riboflavin)
• Contains Niacin (Vitamin B3)
With the presence of a number of nutrients above the guava fruit can be said as the fruit is also rich in nutrients. Because of them that many people who want to cultivate the fruit is sweet, while it was for her own use is not only edible but also processed into drugs.
Benefits of Guava
Many diseases are able to be deflected slowly by this fruit, some of which are as follows.
1. Can Fight Cancer
Get used to a healthy lifestyle on a daily basis in order to avoid serious diseases such as cancer that have reported more patients to death. You can prevent cancer in a way that is diligent guava consumption. There is an antioxidant that is able to do this. Lycopene in guava is known it is easier to be absorbed in the body than the tomatoes because the difference in cell structure.
2. as Diarrhea Drug
Diarrhea should be quick to take medication. The medicine is not to be made in the factory, you can use a method that is more secure and healthy as a drink with guava juice three times a day. Guava plant also has antibacterial properties, these properties that you can use to stop diarrhea and dysentery. The antibacterial properties either be created because of the content of karetinoid, vitamin C and potassium in it.
3. Can Lower Blood Pressure
For People with hypertension are often recommended by doctors to familiarize the consumption of foods and beverages derived from guava and mangosteen peel. Why? because the fruit contains potassium, which is said by the results of the study were able to treat hypertension and lowers LDL cholesterol excess.
4. Cough and Flu
Highly vulnerable to extreme weather conditions to make your baby have a cold with a cough. The mother must take action, by giving red guava juice that also contained vitamin C and iron which can inhibit the influenza virus infection.
Health Benefits of Guava for Health and Beauty - 2
5. Can Overcome Constipation
Constipation or constipation is the most frequently encountered problems. If you suffer from the same thing you do not immediately take medicine, try to eat a medium-sized guava fruit which also included a 36 percent fiber needs that doctors recommend.
6. Make More Stomach Satiety
Guava is the food you choose as a booster stomach, because the content of fiber, protein and some vitamins in it is suitable to withstand hunger. If you are running the program for the diet, the fruit seems appropriate to provide chances of success of your endeavors.
7. as Drug Thrush
Thrush occurs because a deficiency of vitamin C as well as drinking water. You can meet the daily requirement of vitamin C by eating guava, besides that because the vitamin content can be overcome thrush was moved at this fruit.
8. Diabetes Mellitus
Drink a concoction of guava which has been boiled and filtered water is believed to be able to treat the disease diabetes mellitus.
9. Younger
Antioxidants are cooperating also with vitamin A, C and potassium in guava able to treat your skin to keep it tight so avoid premature aging.

It is remarkable not properties of guava fruit that previously may not know fully. From now make guava as a table fruit that is ready to wash the mouth after every meal. Hopefully article Health Benefits of Guava for Health and Beauty we share today can be beneficial for you. Thank You.

12 Days of Fitness with WORKOUT ANYTIME

12 Days of Fitness with WORKOUT ANYTIME

Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

Week 1

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squats
Push-ups 
Walking Lunges
Jumping Jacks
Burpees
Ab half roll backs (seated position, roll half way back, come up and exhale)

Week 2 

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Pop Squats
Push-ups w/alt knee
Forward Lunges with bicep curl
Plank Jacks
Mountain Climbers
Ab full roll up (lying position, roll all the way up, and exhale)

Week 3

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squat swing with overhead tricep press
Spider-Man Push-ups 
Reverse Lunge with bicep curl
High Knees
Shoulder push-ups
Navy Seals (Ab exercise)

Overweight and Food Sensitivity Rule No 1: Delayed Reactions

These are the single most common cause of false fat.

Arguably, delayed food reactions cause as many health problems as some of the most horrific of life’s various risk factors, such as smoking or stress. The effects are often subtle and accumulate slowly, but the harm is undeniable. Without a doubt, delayed food reactions cause weight gain. Because 300,000 people die each year from obesity-related problems, anything that exacerbates weight gain is a serious issue.

Therefore, the average person’s ignorance about delayed food reactions is a serious public health problem. Don’t let yourself be a victim of this lack of knowledge!

Delayed food reactions are very similar to classic allergies. The biggest difference is that when you have sensitivities, you often don’t notice symptoms right after you eat. Sometimes it can take as long as three days for symptoms to appear. The reason for the delay is that this type of food reaction is caused by a different antibody than the one that causes classic food allergies, and it takes longer for allergens to come in contact with this antibody. This antibody, IgG (or immunoglobulin G), is found only in the bloodstream, so food molecules need to reach the-bloodstream for problems to occur. As long as food macromolecules stay in the digestive tract, no symptoms may appear. Sometimes food molecules move out of the digestive tract almost immediately, but sometimes they don’t.

Diet Start

When reactive food macromolecules do eventually meet up with IgG antibodies, the antibodies wage the same basic type of battle fought by IgE antibodies, which cause classic allergies. The IgG antibodies call the immune system into the fight, and histamines and other chemicals are released, causing swelling and other symptoms.

The IgG antibodies are by far the most common antibodies in the body. They’re three times more common than the IgE antibodies that cause classic allergies; that’s one reason delayed food reactions are more common than classic allergies.

Because IgG reactions are delayed, people are often unaware of their real cause. If you feel a symptom on Monday morning, it may be hard to link it to something you ate Friday night.

Another reason people are often unaware of their IgG reactions is that these reactions often don’t occur in obvious places, such as the skin, as do classic IgE allergies.

Even though an IgG reaction may not be obvious, it can still be very harmful. For example, if you’re allergic to bee stings and get an IgE reaction on your skin from a sting, you’ll be sure to notice and treat it. However, an internal IgG reaction to a food may ultimately cause you much more generalized, systemic swelling than a bee sting; it’s like getting a bee sting to the whole body. But because your reaction is spread over your whole body, you may not be very aware of it. All you’ll notice is that you don’t feel good and have more bloating and swelling. After you’ve read this book, though, and learned what to look for, I guarantee that you will notice how drastically food reactions affect your body.

Another antibody that can cause delayed reactions is IgA. IgA fights at the front lines — at the mucous membrane sites and in the digestive tract itself — trying to stop allergens from being absorbed by the body in the first place. To do this, it stimulates secretion of mucus, which blocks absorption.

Studies show, though, that almost half of all Americans don’t secrete enough IgA. Non-reactive people secrete 3,000 to 5,000 mg of IgA every day, but some reactive people don’t secrete much at all. If you’re low on IgA, sooner or later a reactive food molecule will work its way through your intestinal wall and cause a reaction. The more reactive foods you eat, the more likely you’ll be to use up your supply of IgA and lose your front-line force against food reactions.

Therefore, if you do ‘cheat’ and eat an allergenic food, it’s smart not to eat too much of the food. One jam doughnut might get blocked by IgA, but three doughnuts may overwhelm your forces and push you past your allergic threshold.

Another factor that depletes IgA is use of certain medications, including antibiotics, antacids, ulcer drugs, cortisone and aspirin. Again, as you can see, it’s not just what you eat that can hurt your metabolism and make you fat.

Men’s Body Click Diet part 3

What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

Diet Start

The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

The Experiment

For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

The Test

For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

The Data

Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

FurMark: Score (2127), Average Framerate (40fps)
FurMark: Score (3959), Average Framerate (65fps) SLI
Lost Planet 2 – Benchmark B: Average Framerate (44fps)
Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
(Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




Here are some unscripted, raw gameplay framerates, averaged:
(multiple samples taken of each with FRAPS’ built-in benchmarking utility)

Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
[*Game does not appear to be fully optimized currently, article with more detail here:
http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


Here are the PhysX tests, done with FluidMark:

FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

The Conclusion

So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT SCHEME

good representation of the concepts

1st I’ve seen or heard of a GM supercharger on a 1958 Corvette

And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

Carbohydrates, good or bad for dieting

Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

Diet Start

Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

Pastas

Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

The Good and the Bad

Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

cool little trailer with a hinged top

https://www.instagram.com/bikergeardotstore/

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

Hitman: Absolution – First Impressions and Screenshots

I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

An example of how the levels are split up into sections and how you can select past levels to replay them.
An example of the updated game engine, with higher-detailed character models, textures and environments.
Click to see Full Size

Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

Have fun with Absolution and See You In The Games!

My Trip to Male, Maldives, September 2010

The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

View of Water Villas.

View of Maldives by Air (Sea Plane)

Not only did I snorkel but I also went on the “Whale Submarine”

As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

Training Biceps and Triceps with Fat Circular Bands

If you want to take your guns to the next level consider adding in band training.    Those flat circular bands you see in the MX4 Area of the club are serious training tools!    These bands provide the advantage of increasing resistance throughout the range of motion to challenge your muscles in a different, yet complimentary way to free weights or machines.

There are a number of ways to trains biceps with bands from the most simple which is just standing on the band with feet spread and holding the upper loop of the band on both or one and handing and curling up and down.      You can also stand  with one or two feet in the center of a band and grap the two looped ends and curl the end/ends up to pump up those biceps.       Another option is to attach band handles to the band to allow you to use even more resistance.     Standing on one foot in the enter of the band will give less resistance than standing with two feet spread apart.

You can also attach a band to an immovable object like a post or even a door using a door holder (see www.resistancebandtraining.com to purchase one of these.  Another option to create more length is to attach a band low and behind you and then loop another band through this band and attach handles to the band on both ends.      With your back to the anchor grasp the handles and step forward to create some level of tension in the band keep your fee in a split stance and head-up.   Do a bicep curl  with the handles and as you fatigue take small steps back to do drop sets.   This exercise emphasizes the stretched position of the bicep comapred with the single band bicep curl described above.

You can also get an incredible tricep workout using bands using the set-up described above with handles attached to the bands.    In this case turn your back to the anchor grasping the handles with elbows held high by the sides of your heads.   Brace the core while in a split stance and keep the elbows high and motionless then extend your elbows – wow does that create a pump and burn!

To see exactly how to set-up and perform these incredible bicep and tricep exercises using flat circular bands and handles check out this video from resistancebandtraining.com:  https://youtu.be/mF-FbNSPF2Q

The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





Enjoy and See You In The Games!

WORKOUT ANYTIME in Buffalo Grove Patch

WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

24/7 Gym Opens in Buffalo Grove
By: Cristel Mohrman

Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

“We really like this location a lot,” co-owner Eric Nagel said.

(Read More)

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having a ‘grand re-opening’ once again today – January 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for this month’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!


(The Game Tips And More Blog Contest Game #2018-01)

Paperless Mission #9: Setting Up Your Class with Evernote

This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #9: Set Up Your Class with Evernote

Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

Step #1: Register for new Evernote accounts.

This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

Step #2: Build Notebooks for the Subject Areas

My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
 

Why Student Evernote Notebooks Rock

1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

Essential fats

If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

Diet Start

Are you eating the wrong fats?

Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

THERE ARE TWO MAIN TYPES OF NATURAL FATS:

1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

Is it just a case of cutting out saturated fat?

Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

Why don’t food manufacturers use healthier oils?

Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

How is this relevant to body weight?

If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

  • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
  • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
  • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
  • Natural appetite suppressants will kick in.

So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

Essential fats Q&A

Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

Q. How can I avoid hydrogenated fat?

A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

Mercy Health’s new hospital could be economic boon to township
By: Kurt Backschneider

GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

(Read More)

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

How to Organize your Summer Reading

Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

Happy summer reading!

The “Basic Seven” Foods

1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

Diet Start

4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products may be substituted to meet the daily requirements for fat in the diet. Fats provide calories for heat and energy. They yield more than twice as much energy as carbohydrates.

Other foods rich in fats are egg yolk, vegetable oils, olives, nuts, and soybeans.

These are the “basic seven” food groups. One or two from each group should be included in the diet of the whole family every day. The quantities need not be large. The wider the variety, the better. Serve each food attractively. Eye appeal is always important.

In considering the “basic seven,” you will notice that there is no mention of white sugar, spices, or condiments. None of these is essential in the diet. Ordinary white sugar does provide energy, but that is all. There are no vitamins or minerals in refined sugar.

In addition to these “basic seven” food groups one should include at least six to eight glasses of water each day. Water is necessary for removing wastes from the body. It aids in maintaining a normal temperature and in moistening the air we breathe. We do get some water from our foods, but not nearly enough to supply all our needs. Many who complain of sluggishness, fatigue, and nervous headaches would feel better if they were taking more water. It is best to drink between meals. Drinking water should be pure and free from harmful germs. If in doubt, boil the water before using it.

Over two thirds of the human body is composed of water in some form or other. This means that a person weighing 150 pounds has more than one hundred pounds of water in his physical make-up. Even the bones are one-third water. Without sufficient water, the blood cannot circulate properly. Nor can the digestive organs work as they should. All the cells need water. This is the remarkable fluid in which myriads of chemical and electrical reactions are taking place all the time.

A reliable supply of pure water is essential to the life and health of every family. One may live quite a while without food, but not more than a few days without water. There is no substitute for water. It is indeed the liquid of life. Those who follow the “basic seven” in their choice of foods and include a generous supply of pure water need never fear. They will be taking a balanced diet, and they will feel the benefits of good health all their lives.

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

3 Favorite & Underappreciated Apps

I recently stumbled on an adorable blog called “Thirsty Firsties,” and Kelly, the author, is hosting a linky party about iPad apps.

The rules are to share three apps – one free for classroom use, one paid for classroom use and one favorite app for personal use. She’s also giving away an iTunes gift card as part of the linky, so be sure to check out her blog and join in the fun!

I’ve already shared many of the apps that I love and use in the classroom. See, for example, my list of favorite paid apps and my list of favorite free apps. So today, I’m branching out to share some of the apps that I’ve used and enjoyed this year that I haven’t really talked about before.

Favorite Free App – Spelling City

Vocabulary Spelling City is a great app for teaching students vocabulary or spelling words. It has a variety of engaging games, and it can be used by students at all levels. The app itself is free and has a lot of functionality on its own. If you are a premium subscriber to Spelling City, however, it’s a great complement to the activities you assign your students each week. I had my students doing activities on this app almost daily, and our differentiated weekly spelling tests were done entirely through this app (with the teacher premium subscription).

Favorite Paid App – Marble Math

Marble Math is a fun and challenging math game that addresses a broad range of math computation skills. I’ll confess that I’ve even found myself playing it far longer than a typical “teacher test-drive” would require. The object is to navigate a marble through a maze by solving a variety of problems. It includes fractions, decimals, equations, and negative numbers, so this is probably best for grades 4 and higher. Of all of the apps on our iPads this year, this was the one that students seemed to gravitate toward most in their free time.

Favorite Personal App – Feedly

In the debate between Feedly and BlogLovin, I’m coming down on the side of Feedly for one major reason — I LOVE the iPad app. It’s really easy to flip through and navigate, it rotates, and it doesn’t seem to crash as much as BlogLovin did. In fact, I’ve never had a single problem with it. I don’t tend to comment on blogs as much from my iPad, so I can’t speak to that aspect of comparing the two. Usually if I’m browsing blogs on my iPad, I’ll mark the blogs that I want to comment on and comment through my computer later on. So for the sheer visual appeal of the app for reading blogs, I’m a big fan. This has become one of my favorite go-to apps on my iPad.

Now it’s your turn. What are your three favorite apps? I’d love to hear about them, and be sure to link up with Kelly over at Thirsty Firsties if you get a chance. She’s running the contest for the iTunes gift card through Monday.

And don’t forget to link up with my Teacher Toolbox Trio celebration as well! I can’t wait to discover more awesome classroom resources from TpT!

The link between carbohydrates and insulin resistance

The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

Diet Start

Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

The only people who are benefiting from refined foods are:

  • The dentists who have to patch up your decaying teeth
  • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
  • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

Is it enough just to cut out refined carbohydrates?

Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

The Nordic Hamstring Curl: Best Hamstring Exercise You are Not Doing!

There are many different hamstring exercises including variations of leg curls (seated, prone, and standing) along with several different hip hinge exercises that target the hamstrings (RDL, Single Leg RDL, etc).     These are all great exercises, but none of them can touch the Nordic Hamstring Curl for building eccentric strength and preventing hamstring injury in sprints and sport!
This is a tough exercise so warming up the hamstrings is essential.  Using other hamstring exercises first such as bodyweight hip hinges and light leg curls on a machine prior to this exercise do the trick nicely.   It is also a good idea to do some static stretches for anterior hips and hip flexors to shut them off which helps to allow for maximum hamstring activation.
To perform the Nordic Hamstring Curl you need to find a place to hook your heels under when you are in a double leg tall kneeling position so you will also need padding under your knees.     If you have a workout partner you can have them kneel behind you and hold onto both your legs right above the ankles keeping their arm straight so they can use their bodyweight to apply load as you let your body fall forward like this:   http://willlevy.com/wp-content/uploads/2014/08/Nordic-Curl.jpg.     You can also find something to hook your ankles under like the horizontal bar from a weight machine or barbell like this:   https://i.ytimg.com/vi/f_GdZKdwovA/maxresdefault.jpg or  this:   https://s-media-cache-ak0.pinimg.com/originals/29/04/34/290434956cdd220cc8d6e0b18948cf3c.jpgor this:  https://www.t-nation.com/img/photos/2013/13-775-04/Nordic-Start.jpg
Keeping your hips flat (straight line from knees through hips and shoulders) – you lower your body down slowly until you can no longer hold your weight then catch yourself in push-up position and push back up:  https://simplifaster.com/articles/wp-content/uploads/sites/5/2017/03/GHR.jpg.       You can also use a band during the exercise which provides progressively more assistance as you go lower towards floor to allow you to potentially perform the full range of the motion and come back up with the assistance of the band.    Then over time you gradually decrease the assistance of the band by user smaller and lighter bands.      This provides a good video of how you can do this by attaching a band overhead and behind you:  https://www.youtube.com/watch?v=LQm9rdzZlRk
There are also numerous machines designed for this exercise including:
http://www.roguefitness.com/floor-glute?prod_id=15905&gclid=Cj0KEQjwnazLBRDxrdGMx-Km4oQBEiQAQJ1q68P3rah0ZwofpsxOA-xSYl5_v9mtTSxSmuG5zIW1KUYaAvPW8P8HAQ
http://www.speedbottraining.com/glute-ham-machine/
http://www.gluteforce.com/
Here is a 6 week progression:
Week                   Sessions/Week                  Sets                       Reps                     Rest
1                                           1                            2                            5                            2 min.
2                                           2                            3                            5                            2 min.
3                                           2                            3                            6                            2 min.
4                                           2                            3                            7                            2 min.
5                                           3                            3                            8                            2 min.
6                                           2                            3                            9                            2 min.

My trip to Hanoi, Vietnam

I returned to Vietnam to facilitate a 2 day planning workshop for the 6 organizations that I did the capacity assessments in January. It felt good to meet everyone and catch up. The workshop went smoothly and I had very positive feedback from the participants.

I was happy to see people genuinely interested and participating / contributing towards the workshop. This ensured a high quality of the results and the buy in by the participating organizations. I put the success of the workshop down to the following:

  1. The CEO / Executive director (ultimate boss) of the organization participated
  2. They had read the organization capacity assessment report and were familiar with the contents.
  3. They were guaranteed of a tangible workable plan at the end of 2 days.
  4. Being open and willing to learn

There is a chance that I may be requested to do some more work for them in the near future; however it seems that this is the end of this phase and the client is happy with the results.


The view from the roof top restaurant near Hoan Kiem Lake.

I stayed at the Trang An hotel; It’s in the center of Hanoi, near Hoan Kiem Lake, so quite convinient for walking around, shopping, finding nice restaurant, etc… Had a good time too.

Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

“Happy New Year 2017 Greetings”
by The Game Tips And More Blog
(Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

I personally wish you all much better things in 2017!

[To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
HAPPY NEW YEAR ! ]

Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
Captured and Edited by Troy from The Game Tips And More Blog

Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

https://www.gog.com/promo/20170807_weekly_sale
and
https://www.gog.com/promo/20170811_special_promo_strategy_sale

Some other games, which are Free To Try all weekend via Steam, are:

For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
(for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

http://store.steampowered.com/app/304390/FOR_HONOR/

Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
series, is Free To Try all weekend and selling at a reduced price
[I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

http://store.steampowered.com/app/206420/Saints_Row_IV/

Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

Edit:

I completely forgot one more I was going to post in here! 

GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

https://www.gamersgate.com/offers

[Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

WORKOUT ANYTIME in Journal & Topics Newspapers

WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

New 24-Hour Fitness Facility Opens In Buffalo Grove

A new 24-hour fitness facility recently opened in Buffalo Grove.

Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

(Read More)

My Next Assignments…………

Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

  • The client is not clear about what they want
  • They are haggling about rates and costs
  • The client is unsure about you and the organization you represent
  • Does not know / have the resources / decision making power to use the results of the assignment

I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

My trip to Vietnam Cont….

I finished the organization capacity assessment of the 5 local civil society organizations (NGOs) in Vietnam. They are all working or trying to work in a “rights” based approach. The main services of these local NGOs are focused towards marginalized groups, ethnic groups etc. However this is not what the Government wants; they prefer them to work on a needs based approach.

They have therefore come up with a way to allow such organizations to work on a slightly different rights based approach. However this is a structured method which can be monitored by the Government. This is how it is set up:

All international non governmental organizations (INGOs) have to be registered with the ministry of foreign affairs under “VUFO” – Vietnam Union of Friendship Organization. VUFO is the organization which deals with the administration of INGO policy and compliance as it were. Under VUFO they have what is known as the NGO Resource Center which deals with some operational issues as well as help set up working groups under thematic areas. (E.G: HIV AIDS, Gender, LGBT etc.)

All/most (there can be exceptions) rights based local non governmental organizations are registered under “VUSTA” – Vietnam Union of Science & Technology. VUSTA is the organization which deals with the administration of local NGO policy, compliance and deals with the operational issues as well as help set up working groups for thematic areas.

Both types of working groups in theory are independent; however they can have representatives from ministries, other government agencies, communist party advocacy committee etc. in addition to like minded NGOs and INGOs.

Through these working groups research based policy alternatives (advocacy and lobby for rights based services & opportunities) are submitted to each relevant ministries. This is then passed on to the cabinet of ministers. Based on the agenda of the National Assembly cabinet may submit these policy alternatives to the assembly who may or may not approve, amend or adopt these policies. It sound quite easy but in practice this is a long process.

Many organizations do not have long term resources to sustain this type of process. However based on authority levels at different levels/branches of the government some organizations are able to get the corporation of the government to deliver right based services themselves or through quasi government agencies.

The “local NGO” in general is a relatively new phenomenon in Vietnam. They tend to be small and with low capacity. They have the potential to play a key role in delivering services to special interest groups and ethnic minorities in Vietnam. There are some clear examples where the government has allowed the use of this method effectively in isolated cases.

There is a significant difference to how international & local NGOs operate in Vietnam, Lao, Cambodia, China, Mongolia & Myanmar. They have learned to operate within the service gaps of these socialistic countries and they are beginning to get noticed for the excellent work done, by their governments and civil society in general. However, they too face some of the most common issues such as resource mobilization, retention of staff, planning, budgeting, monitoring etc. faced by NGOs the world over.

Now about Hanoi; it is indeed a busy city and one that is growing rapidly I really like visiting Hanoi and the friendliness of the people of Vietnam. I visited most of my favorite cafes and bars which I patronized on my previous travels to Hanoi. Everywhere you look you see construction sites (Except central Hanoi) these buildings are mixed developments like what you saw in Dubai several years ago. They are still to go in for developments such as Dubai Marina, Dubai International Financial District; I counted over 40 cranes on the drive from the airport to my hotel. They do not seem to be affected as much as the others in terms of the global financial crisis.

Walking through the streets of Hanoi I noticed something unique to Vietnam (I think). Most of the Hanoi streets are dotted with Café’s and restaurants. With the vast majority of the Vietnamese using motorbikes for travel, each one of the establishments have something resembling a valet parking for those patrons arriving at the establishment in their motorbikes. The parking attendants use a white chalk to mark on the seat of the motorbike the number of bikes parked in the day / rider / owner / and parking sequence. When patrons leave the parking attendants starts moving the motorbikes closer to the entrance (perhaps for tips) and it is done on a continues basis. I was fascinated by this as my experience in other parts of the world is that they put up a huge sign saying that parking is at your own risk; and they are only interested in what you spend at the establishment and keen to get you out as soon as they can so that another patron can be served. Hope this continues in the future as well.

I will be flying home tomorrow and will prepare for 3 more assignments which have simultaneous time lines. Organization Capacity Assessment of research & policy advice organization in South Asia, Organization Capacity Assessment of 5 local NGOs in Indonesia. Organization Capacity Assessment of 4 branch offices in the east of Sri Lanka.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

Workout Anytime in Global Atlanta

Workout Anytime in Global Atlanta

WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

You can view the full article here. 

Speedrun – Hitman: Absolution – Contracts (The First Hit)

After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

Level: Hitman (Absolution) – Contracts (The First Hit)
Time: 21 seconds
Score: 95,186
Runs: About 4-5

After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

Good luck with it and See You In The Games!

How Much Protein Do You Need Each Day?

One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
How much is too much?

In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
 
This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
Safe and Adequate Protein Intake

The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

Workout Anytime in Louisville Business First Inbox

Workout Anytime in Louisville Business First

Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
You can read the full article here. 

Multi-Protocol Label Switching (MPLS) continue…

Adding a Label

MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

Internet 2010

However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

Using Frame Relay and ATM with MPLS

One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

HOW TO DECORATE A KITCHEN MINIMALIST

A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

WORKOUT ANYTIME on WYFF Greenville

WORKOUT ANYTIME on WYFF Greenville

Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
View the segments here and here. 

Monitoring weight loss

There are two schools of thought on how to monitor weight loss:

  • Daily weighing
  • The once-weekly weigh-in.

This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

Diet Start

TOP ANTI-SNACKING TIPS

  • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
  • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
  • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
  • If you are going to snack, make sure it is a protein snack.

Dietary demons – and how to beat them

  1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
  2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
  3. Alcohol: you are allowed a couple of glasses of wine when you start the
  4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
  5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

Curb your cravings by curbing your carbs

When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

Back to School – Math Edition

It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
  • You may use any combination of addition, subtraction, multiplication, and/or division
  • You may combine numbers, e.g., use 2 of the fours to make the number 44
  • You may insert decimal points
  • You may use a four as an exponent
  • You may use square roots
  • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
  • You may use overbars to make a decimal repeat
  • You may NOT use any digit other than a four
  • You MUST use all four 4’s in each solution

Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

My Travel Tips

I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


Clothes and shoes


1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


Money and Travel Documents


1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


4. Carry globally accepted credit cards as a payment option and for emergencies.


5. Always take travel insurance; you never know when you might fall sick or get injured.


6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


Baggage


1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


2. Finalize your clothes 12 hours before you travel, based on above.


3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


4. Try to use the minimum number of bags as possible.


5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


Loyalty Cards


1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


2. In my opinion the top benefits of loyalty cards are:


a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


c. VIP services for priority emigration and customs clearance.


d. Access to a lounge with free broadband internet connection


I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


Hotels


1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


2. The main facilities you should be looking for when selecting a hotel are:


a. Airport pick up and drop


b. Free broadband internet access


c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


Flights


1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


c. You will increase you total transit time (Time spent not flying) and for a business person time is money.


d. You may need to move your luggage over long distances between domestic and international terminals.


e. You may need to pay again for excess baggage


f. Domestic airlines too will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


g. Most domestic airlines operate very old aircraft which may have a bad safety record.


Jet Lag


1. Living in the destination time zone – From the time you start your journey try to do things such as taking meals and sleeping according to the destination time zone. This will give your body extra time to adjust to life in the new time zone. Most airlines try to do this using the cabin lights to mimic the time of day. Unfortunately only the modern aircraft have this feature.


2. Drinking fluids. – You must be well hydrated 24 hour before the flight, So refrain from:


a. Heavy exercises that make you loose water through excessive sweating


b. Drinking too much alcohol the day before you travel.


3. Reduce the build up of static electricity on your body and clothes. Once at your choice of accommodation at your destination find a wooden or cement / tile floor. Take off your shoes and socks and walk on the surface for a few minutes. The best solution is walking on grass however this may not be possible at your destination. However this may be an option for you on your return to your home.

How I Decluttered my Inbox

I try out new apps constantly, but it is rare that I find one that I consider a game-changer — one that revolutionizes how I do something and boosts my productivity.

Meet Mailbox.

Mailbox works with iOS mobile devices (iPhones, iPads) and GMail, and it can handle multiple GMail accounts. The idea is that your email box should always have ZERO messages in it, and it helps you achieve that goal by giving you four options for each message in your inbox.

Big-swipe to the left: Add to list

So many of the emails that I receive are ones that I don’t need to respond to immediately, and Mailbox understands that by allowing you to file messages as low-priority action items. It has three main lists:

  • To Read — great for newsletters and other items you’re interested in reading at some point but not necessarily the second that it arrives in your inbox
  • To Watch — my husband and some friends will sometimes send me YouTube videos that I can’t watch at work — not because they’re NSFW, but because YouTube is categorically blocked at my school. These videos also tend to be low-priority items.
  • To Do — emails of things to add to my “to do” list

It also gives you the option of creating additional lists. I made the “To Buy” list, for example, for items like subscription services that are going to expire sometime soon that I need to renew or for wishlist items that I’m thinking about buying someday. 

Short swipe to the left: Defer

Sometimes I receive messages that I want to deal with, but not at the time I’ve received it. When I’m using my iPhone, for example, I rarely respond to email because I prefer typing on my laptop. Some emails are ones that I’ll look at more closely at night or over the weekend when I have more time. Other emails are ones that I want to deal with at a specific future time or date. Consider these examples:

  • a coupon for a clothing store that I might use but is only valid for a certain week in the future
  • a confirmation email for an upcoming trip or conference

The beauty of the Mailbox app is that you can set the exact date and time when you want that message to reappear in your inbox by letting you “Pick Date.”

The message will reappear in your inbox at the date/time you specify so it can get your attention rather than just getting pushed to the depths of your inbox to be forgotten.

Short swipe to the right: Archive the message
I might want to look for it someday, but it’s not something I need to act on.

Long swipe to the right: Trash the message

Mailbox is a free app in the iTunes store, and in the three weeks that I’ve had it, it has replaced the default Mail app on my iPhone and completely changed the way that I manage email. I’ve gone from having literally 1,000s of emails in my inbox to having ZERO. It’s the first time I’ve ever felt like I’ve been on top of my email situation.

The iPad version just came out this week, and I’m using that a lot, too. It has a larger interface, but all of the same features. Here’s a screenshot of it on my iPad:

You can see that I have one message in my inbox — a coupon that I have to use this weekend if I’m going to use it at all. I’ve deferred 14 messages — some that I’ll reply to on Tuesday, others that I want to deal with once I’m completely done with school on Thursday. I’ve got some lists, but I can also check the archive or the trash in case I accidentally swipe something into the wrong place and want to move it back out.

If you click on a message in your inbox, an image of it will appear on the right so you can decide what to do with it. It’s a very easy-to-use and intuitive app, and now that I have it, I can’t imagine giving it up. It’s a huge asset to my productivity, and my only wish is that I could use this with other email platforms — like my school/work emails — that aren’t GMail accounts.

Have you tried Mailbox yet? I’d love to hear about how you manage email productivity in the comments below.

Hope you’re having a great Memorial Day weekend!

My Trip to New Delhi & Hyderabad Cont………

My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

((Portions of this article
may or may not have
information obtained
from this unidentified
Imperial Officer))

Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

“If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

– There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

– The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
[Because of this element, more than anything, it could possibly be construed as “gambling”…]

– Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

Together, all three points mean the game essentially has “gambling” within it…
I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

~Troy from The Game Tips And More Blog

WORKOUT ANYTIME on FOX 56 Lexington

WORKOUT ANYTIME on FOX 56 Lexington

Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
View the full segment here.

Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

Here is where the Skins, Mounts, Announcers, etc can be located now:

The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

[Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
I may return to add some Images and/or Screenshots in the future.
This post will be Updated for the next few days, as I encounter new related information.]

If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

Issues Seen/Encountered:

  • Game not starting [Launcher will start, but game itself will not show up]
  • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
  • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
  • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

Steps Taken/Tried:

  • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
  • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

Men’s Body Click Diet part 2

What I’m giving you here is a chance to climb the ship’s mast with me so that from its top we can see far over the horizon of medicine. The view from the masthead is based not so much on my daily activities as a practicing physician but on my mission to search the seascape of scientific research for courses that can help prevent my patients from developing prostate trouble. What I see from the top of the mast is a body of evidence that is solid enough to support these simple changes in behavior, especially considering that there’s zero risk in consuming flaxseed and soy protein.

The best evidence is based on studies done in a couple of places in the world, where prostate troubles are rare. Solid epidemiological studies that show a lower incidence of prostate cancer in men consuming foods popular among Finns and Chinese — rye bread for Finns and soy for Chinese.2 And he has carried out elaborate chemical analyses and experiments to show which substances in these foods provide the protection.

For years before his research was done, it was assumed that the Finns’ genetic history accounted for their lower incidence of prostate cancer. Most modern Finns come from a small number of people who migrated to that part of the world many years ago, so they are a rather distinct linguistic, racial and genetic group. It turns out, however, that it’s not their genes but their diet that protects them against certain cancers. And the dietary factor that is most significant is a sourdough rye bread that is eaten by people consuming a traditional Finnish diet. This whole-grain, heavy- duty bread is made out of ground whole rye seeds without anything removed. The leavening is provided by lactobacillus (acidophilus) instead of yeast, which is used to leaven almost all bread consumed in other parts of the world. What’s key is that the rye fiber contains lignans that modulate hormone chemistry and reduce the risk of reproductive cancers.

Diet Start

Eastern Europeans have traditionally used flaxseeds as a source of food and medicine. Flaxseed oil, which makes up about one-third of the weight of the seeds, has extremely healthy properties that also provide particular benefits for the prostate gland. But here we’re talking about the fiber in the flaxseed. The best way to use the seeds is to grind them in a coffee mill. You can then consume the fine, fluffy powder as part of a shake or add it to a variety of other foods. Your aim is to eat a heaping tablespoon per day.

Besides rye and flaxseed, there are other foods that contain lignans. Some of the best sources include legumes (especially lentils, kidney, fava and navy beans), seeds (like sunflower seeds), seaweed, cereal brans and whole grains.

There is also a solid body of evidence supporting the role of soy protein in reducing the risk of prostate cancer. For example, research has shown that isoflavones, substances contained in soybeans, modify testosterone metabolism, decreasing the risk for both benign prostatic hypertrophy and prostate cancer.3 Incorporating soy protein in your diet doesn’t require you to change what you eat, although it’s fine to eat more tofu, miso and other soy products if you enjoy them. The simplest, quickest way to consume soy protein is by stirring soy protein isolate, a relatively tasteless substance, into some of the food you are already eating.

Foods like soybeans, flaxseed and rye contain information derived from phytonutrients, which keep animals in synchrony with the rhythm of the seasons and which have profound effects on our own reproductive systems.

Prostate Inflammation or Nonspecific Prostatitis

Your prostate gland usually doesn’t speak to you until it’s in some advanced state of trouble. When it does, it has only two voices. One is expressed through pain or difficulty with urination and the other is just plain pain, which is almost invariably felt in the midline of your body. The spectrum of difficulties includes inflammation, enlargement and cancer. While there are more or less pure representations of each one, the lines between them are often blurred. All three, but particularly enlargement and cancer, are addressed by the preventive measures included in the Body Clock Diet.

Let’s start with inflammation, which is the medical term for some combination of redness, pain, swelling and heat that almost always accompanies infection but may also represent your body’s reaction to noninfectious irritants or allergens. The flame of prostate inflammation is experienced as burning with urination. This is as much a result of inflammation of the tube through which the urine passes out of the penis (the urethra) as it is due to inflammation of the prostate, per se, which lies astride this tube, just beneath the bladder. Germs that infect the urethra, such as the gonorrhea germ, may ascend it and get into the prostate gland. There, the alkaline environment and blood supply, which are conducive to bacterial growth, make it much harder to treat the infection with antibiotics than, say, a sore throat, a boil or an uncomplicated pneumonia. Because the germs that infect the prostate are difficult to extract from apatient for a culture it has become a common practice for doctors to treat symptoms of prostate inflammation with antibiotics without knowing what germ, if any, might be there.

The diagnosis in this situation is ‘nonspecific’ prostatitis, which is a well- accepted medical term. But when you stop to think about it, it’s peculiar. According to medical principles, when there is an infection, the perpetrator is almost always a particular germ. The prostate, like all internal tissues, is not likely to be infected by more than one germ at a time. The implication is that if there’s an infection, it’s quite specific. How then do we come up with the diagnosis ‘nonspecific’ prostatitis? It’s a result of several factors; efforts to recover a germ are to no avail, the prostate acts as if there’s an inflammation — with swelling, pain, difficulty urinating and sometimes cloudy or pussy urine — and antibiotics are at least temporarily soothing. But after antibiotic treatment, this problem recurs more often than other infections.

Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
For a video example of how to set the x264/AVC codec recordings to be editable in
Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

Recording with H.264/AVC

“x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
http://sourceforge.net/projects/x264vfw/

This official codec is what is covered in the “Easymode” sections of this article


This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
http://www.digital-digest.com/software/x264_VFW_Codec.html
http://komisar.gin.by/index.html

This unofficial codec is what is covered in the “Hardmode” sections of this article


Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

Here’s how to select it for usage in these three game recording programs:

Recording with x264 and Bandicam

  • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
  • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
  • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
  • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and Dxtory

  • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
  • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and MSI Afterburner

  • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
  • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
  • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
» Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

[This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

Bitrate (in Layman’s Terms)  /start

When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
The main thing to remember is that More Bitrate = Bigger Filesize

For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
8 bits in 1 Byte
8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

That’s the interaction of bitrate and quality.

Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

Bitrate (in Layman’s Terms)  /end



The x264 Interface and Configuration in “Easymode”
(The Official interface with red x264 logo)

With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
The Basic Section

To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

The Rate Control Section

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
“Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

The x264 Interface and Configuration in “Hardmode”
(The Unofficial interface with black x264 logo)

There are three main tabs in this version of the x264 Video For Windows interface: 
Main
Analysis and Encoding
Rate Control and Other
Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

Rate Control & Other Tab

In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
That’s right, we convert it to lower-case (small-‘b’) bits, first:
We want 1 MegaByte per second of a bitrate
1 MegaByte is 1000 KiloBytes
since 1 Byte = 8 bits
then 1000 KiloBytes = 8000 kilobits
so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
That’s all we will adjust on the Rate Control & Other tab.
Analysis & Encoding Tab
Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

Frame Types (in Layman’s Terms)  /start

There are three main types of frames in video encoding:
I-type frames
P-type frames
B-type frames

I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

Frame Types (in Layman’s Terms)  /end

Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
[In tests, enabling B-frames would actually crash the x264vfw app]
Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

[In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

 [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

Main Tab

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

Slash-whew-sweating-emoticon

That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


Personal Short Version/Opinion
and 
Settings I use:

H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

For the Official (“Simple”, red x264 logo) interface:

I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
[I usually use Superfast]

While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
[I always use Zero Latency]
[Even though it helps with speed, most of the time I don’t use Fast Decode]

The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
[I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

For the Unofficial (“Complicated”, black x264 logo) interface:

The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
[I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
[I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

For this second tab then:
[No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
[No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


See you in the games!

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

Example of ‘the screen shake effect’ I made, in GIF format
(Click to see slightly larger Full Size)

I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


Spells with Screen Shake
Zagara – Nydus Network (R)
Genji – Swift Strike (E)
Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
Gazlowe – Deth Lazor (W)
Lucio – Soundwave (Q), Sound Barrier (R)
Valeera – Blade Flurry (W)
Zul’jin – Twin Cleave (W), Guillotine (R)
Ragnaros – Sulfuras Smash (R)
Alarak – Lightning Surge (E)
Cho – Upheaval (R)
Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
Anub’arak – Burrow Charge (E) (Upon resurface)
Li Li – Water Dragon (R)
Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
Falstad – Hinterland Blast (R)
Kerrigan – Impaling Blades (W)
Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
Sonya – Ancient Spear (Q) (On Hit), Leap (R)
Stitches – Slam (W)
Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
Uther – Hammer of Justic (E), Divine Storm (R)





Heroes with No Screen Shake
Valla
Tyrande
Lunara
Kael’thas
Zeratul
Cassia
Probius
Varian
Samuro
Zarya
Auriel
Gul’dan
Medivh
Chromie
Tracer
Dehaka
Xul
Li-Ming
Greymane
Gall
Artanis
Lt. Morales
Rexxar
Leoric
The Butcher
Johanna
Sylvanas
The Lost Vikings
Thrall
Jaina
Azmodan
Chen
Rehgar
Murky
Brightwing
Tychus
Abathur
Arthas
Illidan
Malfurion
Nazeebo
Nova
Raynor
Tassadar

I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



Just letting Sufferers know: It’s Not Just You™!
[I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

Paperless Mission #11: Getting Started with Edmodo

This is the eleventh installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #11: Get Started with Edmodo

One of the tools that I started using in the classroom this year is Edmodo. If you’re not familiar with it, Edmodo is a learning management system that allows students and teachers to interact online in safe environment. It looks and feels a lot like Facebook but without all of the potential problems Facebook could create — especially for very young users.

1. Create a teacher account and create your group for your class.
Teacher accounts are free, and they’re the first step toward using this in your classroom. Parents and students aren’t able to access Edmodo unless they know the access code that a teacher has given them.

2. Add some content for your students to engage with the first time they use Edmodo. You can ask a question for discussion or take a poll as a good first activity. You’ll want to have something queued to go so that students don’t just start posting randomness. (They may do that anyway at first, but you can at least buy yourself some time to talk about guidelines and procedures for that before they get too carried away.)

3. Invite students by giving them the Group Code. This is unique to your group, and students will need an access code for each group they join with their student account. Joining your group doesn’t give them the power to search for other groups. Similarly, if another teacher at your school is using Edmodo, he or she will also have a Group Code that students can enter and just add the group to their account. It’s pretty easy.

4. Once all of your students have joined the group, lock your group. This will prevent other students from other classes inadvertently joining, and it’s generally a good security measure. You can always unlock the group temporarily later on if you end up getting a new student.

5. Create an assignment. This essentially creates a place for students to turn in their work. Everything that they complete on their iPads gets turned in through the assignments I create on Edmodo. Then I can see which students have turned it in, assign grades, and give feedback. The beauty of this system is that I can grade work as it comes in without worrying about losing something. This is especially helpful on larger assignments where students tend to stagger their completion.

6. Give quizzes. I won’t lie — this is probably one of the most tedious parts about Edmodo from a teaching perspective. You have to manually input all of the questions, and there’s currently not a way for teachers to share their quizzes with one another. But the time you put in on the front end of creating the test is more than made up for on the back end by the immediate grading of the multiple choice, true false, and matching questions. I’ll talk more about Edmodo quizzes in a future post.

7. Set up small groups. You can create multiple small groups within your group, and students can belong to more than one small group. That means that you can have small groups for reading as well as different small groups for research projects in Social Studies, etc.

Preparing Students

My students really did see this as Facebook-lite, so it was important that we created some guidelines as a group. Here are some of the rules we discussed and implemented as a class:
  • Use posts to discuss school-related content only — not to share personal information or “status updates.”
  • Use appropriate school language and grammar, not texting language.
  • Be positive and kind and show good “Netiquette.”
My fabulous media specialist, Sandi at Teacher Technotopia, did a series of lessons with students about “Netiquette” prior to this, which helped a lot. I also moderated the conversations a lot at the beginning. As the teacher, you can delete things that other students post and you can send that student a direct message to let them know that you deleted their post and why you did so. That helped with my class tremendously.  
As a side-note, one of the things I like about Edmodo is that you can send your students direct messages, and they can send you messages, too, but they can’t send direct messages to each other. Anything they post is either public within the group or for the teacher-only. This eliminated some of my concerns about possible cyber-bullying.

How I Used This in My Classroom

Once we got going with Edmodo, I used it constantly. Virtually every test (except math) was done through Edmodo. It was also great for collecting student work, taking polls, and facilitating class discussions. For example, when we were deciding what our class team name would be for field day, I was able to relegate that entire conversation to Edmodo rather than take up valuable class time on it. I also love that students can access Edmodo from any computer or mobile device, so they could keep going on assignments even if they couldn’t take their iPads home. It’s not a perfect platform, but it was really helpful in my move toward a paperless classroom.

Do you use Edmodo in your classroom? I’d love to hear your thoughts about it in the comments section!

Foam Rolling aka Self Myo-Fascial Release

Using a tubular foam roller to literally roll over tight areas of muscles and tendons is known as “Myo-Fascial Release”.    While it seems counter-intuitive applying steady pressure to muscles and tendons with an emphasis on trigger points (areas of tightness and soreness) has been proven to be a highly effective method for improving mobility.    
Since you are in complete control of the amount of pressure applied and how long it is applied you can customize the experience based on your level of sensitivity.   Key areas to focus on include the hamstrings, calves, gluteal muscles, latissimus dorsi muscle, and even low back and hip flexors if done with caution.
You can use a tubular foam roller, and they are made in varying levels of firmness from soft to very firm.   In addition, there are variations that include a textured surface of varying levels from small to large finger like projections.  You can also use balls such as a lacrosse ball, baseball, or tennis ball in a similar fashion.     NOTE:  the smaller and firmer the object the more pressure it will tend to apply so proceed cautiously.
The technique is to position the foam roller on the floor (on a firm but not hard surface is best).  Then position the muscle/s you are targeting on top of the foam roller.     For example, for the calf sit on the floor with your target leg extended so that it is on top of the foam roller with the lowest portion of the calf on top of the roller.    
Use your hands to lift your butt slightly off the floor to allow you to apply pressure down onto the foam roller.    Then literally roll forward slowly over the foam roller paying attention to any trigger points where you notice sensitivity or tightness.   
When you find a sensitive area slowly roll back and forth on the spot until you feel it release.   With a little experimentation you will learn how much pressure and speed work best for your physiology. 
Self Myo-Fascial Release/Foam Rolling is a great way to start a workout and does a great job of safely improving mobility before a workout and is also great to do between workouts.
Contraindications to Foam Rolling
Pregnancy – during pregnancy ligaments become lax and pressure anywhere on or near the abdomen is to be avoided at all costs so best to skip foam rolling when pregnant.
Osteoporosis – soft bones and additional pressure are not a good combination so best to avoid foam rolling without a physician’s permission if you have moderate to severe osteoporosis.
Intervertebral Disc Issues – anyone with disc problems in their spine should be cautious with foam rolling because pressure in the wrong areas can create problems so again get guidance from a medical professional if you have an disc issues in your spine.
Inability to support bodyweight on arms or legs – foam rolling cannot be done safely if a person lacks the strength to support their bodyweight on their arms and/or legs.
For a pictorial guide of various foam rolling exercises to target specific body parts click here:   https://www.pinterest.com/explore/foam-rolling/  

BEAUTIFUL INTERIORS STYLE FROM SHH

SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

January 2011

Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

December 2010

It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

November 2010

The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

My Trip to Baticaloa

On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

reACT Trainer Total Body Circuit Workout

One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

Horizontal Press (chest press of some type)

Horizontal Pull (Row of some type)

Overhead Press

Vertical Pull – (some type of vertical pulling movement)

Here is a sample reACT Trainer Total Body Circuit:

Quick Tip: Team Fortress 2 – What To Do With Those Naughty and Nice Winter Crates (Winter 2013)

By now, most of you have seen these Random Drops, Crates that are either “Nice” or “Naughty” – but, “How do you open them..”, you may have asked? Well, this post is just a quick note to answer this question I have already started seeing on game forums and Question/Answer websites. Answer: You Can’t Open Them (Yet)…

Soon hopefully, keys should be available for purchase at the Mann Company Store (Steam/Valve/TF2), most likely for $2.49 USD, if keys and dropped crates combinations of the past are anything to go by [I assume they are dropping them now, to allow people to collect some before the keys go on sale – to sell more keys]. So, if you get these [I have already started getting them when playing, hence the screencaps], just wait a little bit longer, until the keys themselves go on sale. Then, if you want to open them, just purchase keys and unlock them! Soon™… (Remember, you will need one key for each crate)

See You In The Games!

Men’s Body Click Diet part 1

In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

Diet Start

The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

Prostate Ailments: The ‘Male Problem

There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

Diet and Prostate Health

If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

High-quality protein

Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

Diet Start

Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

What is Biological Value?

In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

The only whey to go

To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

¨ It encourages the formation of lean muscle mass

¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

¨ It helps to build healthy new collagen

¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

¨ It is a quick and easy way of having a high-protein meal or snack

¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

And click here to see my review of Chapter 2!

Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

Thanks for reading,

Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

[Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

1923 Buick Roadster with a cool spare tire lock and tool kit

Tips For Rustic Dining Room Setting

The Rustic look is a perfect balance of masculinity and femininity. You take the simple and unsophisticated woodsy elements of country living and add a feminine touch by complimenting and giving each piece a voice.

Rustic Dining Room
Rustic Dining Room
Rustic Dining Room
Rustic Dining Room
Rustic Dining Room

Keep your walls and furniture light in weight and color, unfinished and whimsical in nature. Think bare essentials, and the more imperfections the better!

With dark wood or contemporary dining furniture you can transform the style with a nice weathered look by sanding it lightly or painting it a creamy pastel color first and then sanding it.

Add textural interest with a soft faux finished wall, an antique area rug, or by stenciling a simple pattern on the doors of your hutch and/or buffet.

If your resources are limited you can use whatever furniture you do have and accessorize with rustic objects. Throw a handmade crocheted or lace tablecloth over a buffet for an authentic touch or hang dried flowers in artistic way on the wall.

It’s OK to mix old with new objects like taking a colored glass bowl and filling it with acorns or pine cones. You can also fill a ceramic vase with wildflowers and set it on the dining table for a rustic tone. Just remember, thoughtful simplicity is key…

Workout Anytime in North Fulton Newspapers

Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

New Workout Anytime coming to Milton
By: Caitlin Wagenseil
MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


(Read More)

TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

RCT2 testing (codecs/settings) with Bandicam (Samples)

Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

Recorded game: Rollercoaster Tycoon 2 (RCT2)

Some recording data (per codec) for this test:

MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

*XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

Brief analysis of sample video:

  • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
  • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
  • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
  • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
    (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
    Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
    *More on this issue and x264 recording in a future article
  • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

    Some related articles:
    Game recording comparison with various codecs and settings (Minecraft)
    http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
    The ghosting/blurring effect when rendering in Sony Vegas products
    http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

  • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
  • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
  • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

That’s it!

Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
See you in the games!

How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


[Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

“Why am I having so much trouble aiming/killing in <game name>?”

“Why does it seem so hard to kill people <in a Multiplayer game>?”

“How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

…and similar questions.

Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

—–

If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

(I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


There are a few places you must adjust it:

– in Windows (Settings>Devices>Mouse [for Windows 10])
– in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
– in the Game (Options or Settings)


Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
You must find your own movement type and movement rate, set by those three locations previously stated.

Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

—–
Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

SYITG

10 Must-Have Tools for the Busy Teacher

This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

1. Nozbe

Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

2. Evernote

This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

3. Dropbox

 I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

4. GoodReader


 I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

5. GoogleCalendar

I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

6. YouCanBook.Me

This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

7. Planbook.com

Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

8. Typinator

This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

9. GoodReads


Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

10. Edmodo

I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

ROUTINE FOR PUTTING ON WEIGHT

Plenty of rest and exercise, a good diet of fattening foods and no worries—those are the essentials

PUTTING on weight is very much more difficult than taking it off. Even thosefew extra pounds which can make all the difference to the appearance, comfort and, no doubt, general health, can be quite a problem.

Before embarking on a diet, it is always advisable to seek the advice of your own doctor. This is particularly important if there has been a sudden or prolonged loss of weight for no good reason and without affecting normal appetite. Where loss of weight is the result of an illness or operation, it is usually quite quickly and easily regained after recovery. The routine to be described will help in such cases, subject to the approval of your own doctor.

We are concerned here chiefly with that large army of men and women who are anxious to put on weight but who are the thin type by nature. Such people are born worriers, with excitable and energetic natures and over-active bowels, whose food does not remain in the intestines long enough to be properly absorbed.

Diet Start

Essential in the fattening process are:

  • Keep calm and stop worrying. That is obviously a counsel of perfection to those who easily get worked up, but it can be achieved by cultivating outside interests that take your mind away from the source of anxiety (it may be professional, domestic, financial, or all three).
  • Take plenty of rest. A minimum of between 8 and 9 hours in bed at night, plus between 10 and 30 minutes after every meal.
  • Avoid rushing about, but take regular exercise. On no account jump up immediately after a meal; take life at a leisurely pace. Strenuous games are good if you really enjoy them, because they create appetite; so does any form of outdoor exercise, however mild.
  • Eat well and regularly, and concentrate on the fattening foods (list follows). But be careful not to stuff between meals or you will defeat the whole object and be unable to eat your main meals, which are far more important. You must also avoid over-eating, with the inevitable danger of indigestion and biliousness. Aim at three good meals a day, plus any extras (such as sweets, etc.) which you really fancy and a hot, preferably milk, drink last thing at night. The housewife should take as many meals out as she conveniently can because she will not have the worry of preparing them.
  • Cut down your smoking. It diminishes the appetitite, so, if you must smoke at all, only after meals, please.

Sugar, sweets, jam, marmalade, fruits in syrup, treacle, honey, Golden Syrup.

Cakes, scones, pastry, cereals, bread, biscuits, puddings.

Thickened soups and gravies, sauces made from flour, butter and/or milk.

Fried foods, cream, salad dressings, butter, dripping.

Pork, duck, goose. All fat meat and bacon. Tinned fish in oil.

Sweet wines, beer, stout, spirits, sweet aerated waters.

Dried fruits. Bananas, grapes, plums. Potatoes, peas, dried beans, parsnips, beetroot.

Cod-liver oil, Virol, olive oil.

Salt with food.

Foods with very little fattening value

Meat extracts. Marmite. Clear soups. Gelatine. Egg-white.

Green vegetables and salads. Vinegar. Tea. Coffee.

SPECIMEN DIET FOR PUTTING ON WEIGHT

Minimum: 1 pint of milk per day

On waking: Cup of tea, preferably with milk and sugar.

Breakfast: Cereal or porridge with milk and sugar or honey or syrup.

Bacon, egg, fish, etc.

Toast, butter and marmalade.

Coffee or tea.

11 a.m.: Coffee, cocoa or milk and a biscuit, or try this cocktail: One teaspoonful Spanish olive oil sandwiched between layers of orange juice in a wineglass. You can increase the quantity of olive oil gradually.

Lunch: Thick soup, if liked (if this makes it impossible to eat main course, substitute tomato or orange juice as an appetiser instead).

Meat, fish, game, poultry, etc.—both fat and lean. Serve with gravy, roast or fried potatoes and a green vegetable or salad with plenty of oily or cream dressing.

Pudding and / or cheese, butter and biscuits.. Coffee.

Tea: Tea with cake or bread and butter or banana sandwich.

Dinner: Thick soup (see Lunch).

Fish, meat or poultry, with gravy, at least one vegetable from list of Fattening Foods; one green vegetable or salad with cream or oil dressing.

Steamed or boiled pudding or milk pudding or ice cream.

Cheese with bread or biscuits and butter.

Coffee.

NOTE: Cocktails, wines. etc., may be taken as desired and obtainable. Stout or beer is good.

Bedtime: A hot drink, preferably containing milk.

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Reading in the Wild – Chapter 1

I absolutely loved Donalyn Miller’s book The Book Whisperer: Awakening the Inner Reader in Every Child, so I was very excited to see that she released a new book – Reading in the Wild: The Book Whisperer’s Keys to Cultivating Lifelong Reading Habits AND that Catherine over at The Brown Bag Teacher has organized a summer book study of it.

Chapter 1 – Wild Readers Dedicate Time to Read

Already, this book has lots of ideas that I can integrate into my classroom. In fact, I suspect that I will re-read each chapter just to make sure I’m recording all of the ideas so I remember them in August. (And I may go back and re-read The Book Whisperer, too!) But one thing that I really want to emphasize this year is building a community of readers. I like the idea of students sharing the books they’re reading and making recommendations to each other. Personally, I use GoodReads to track that information for myself (I’ve blogged about that before here). I’ve also had my students blog about their reading (see here). But what I’d really like is something more like GoodReads – a social networking site – but appropriate for fourth graders. 
I recently stumbled across the site Reading Rewards through a Twitter Chat, and this might be the answer I’m looking for. 

This site allows you to set up your class into a reading community where they can create libraries of the books they’ve read, write book reviews, get and make recommendations, and make a wishlist of books they want to read. There is also a reading log component and a reward system that allows you and parents to create rewards based on achieving individualized reading goals. I haven’t had a chance to try this out with students yet, but based on my exploration of the site, it looks very promising.

Do you have any experience with the Reading Rewards website? Have you come across any other sites you’d recommend for building a community of readers? I’d love to hear about it in the comments.

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

The Risk Factors That Cause Food Reactions (6-10)

Risk Factor 6. We eat too much at once.

Overeating causes food reactions by overwhelming the digestive system. Unfortunately, reactions also cause overeating by creating food cravings, and this destructive cycle ruins many lives. The problem gets even worse when people eat the exact foods that cause them to experience reactions. This often happens, however, because of the cravings caused by allergic addiction.

Overeating also disrupts the immune response, which further heightens food reactions.

Risk Factor 7. We’re under too much stress.

Stress hurts digestion. When you’re under stress, your stresshormones — such as adrenaline and cortisol — take blood away from your organs of digestion and shift it to the fight-or-flight organs and systems, such as the muscles, eyes, and heart. Sometimes, when you’re nervous, you feel this loss of circulation in your digestive system as butterflies in the stomach.

Diet Start

Proper digestion is most likely to occur when we take timeto eat our meals in a relaxed atmosphere. However, the average worker sits down for lunch for only eleven minutes, and many for only five minutes, or eats a sandwich unconsciously while working.

Risk Factor 8. We don’t chew our foods completely.

This interferes significantly with digestion. Foods that remain in excessively large pieces can’t be broken down properly, even when enough digestive juices are available.

Risk Factor 9. We drink too many liquids with our meals.

This dilutes digestive juices and stomach acid, keeping them from fully digesting our foods.

Risk Factor 10. We combine too many of these risk factors.

If we regularly made just one of these mistakes, we might not have a problem. Most people, though, combine several of these risk factors, and soon they experience the straw that breaks the camel’s back. Doctors call this reaching the allergic threshold.

All of these risk factors can cause your digestive system to dump large, unwieldy macromolecules of food into your bloodstream. When this happens, it generally triggers your immune response.

If your immune system is already impaired, your immune reaction to these macromolecules of food will be even worse. You’ll get reactions to a wider variety of foods, and your symptoms will be more severe and more frequent. Many forces can impair immunity: poor nutrition, exposure to toxins, stress, and lack of sleep.

Therefore, to avoid food reactions, you should not only minimize your risk factors, but should also try to optimize your immune strength, with a healthy lifestyle, ingestion of specific nutrients, and avoidance of toxins. I’ll soon tell you how to do this.

In addition, a number of non-food factors can make food reactions worse by contributing to the allergic threshold. The body doesn’t care if an allergen is a food-borne allergen or an airborne allergen, such as pollen. To the body, an allergen is an allergen. Food reactions are worse in people who inhale airborne allergens, are exposed to toxic chemicals, or are under stress.

Therefore, you are not just what you eat.

Food reactions — and therefore fat — can be caused by many factors, and food is just the most obvious one.

I know that this is a new, strange concept for many people. But I have tested this concept clinically and have seen it work wonders.

Here’s an example: a patient of mine worked in a paint shop and regularly inhaled airborne toxins. This man was bloated, puffy, and red-eyed most of the time, and reacted strongly to a number of foods. He also got sick a lot because the toxins he breathed were stressing his immune system. When he switched jobs and escaped the constant assault of airborne pollutants, his sensitivity to foods decreased dramatically. His progress on the False Fat Diet accelerated tremendously when he quit his job, and he soon lost almost all of his false fat and most of his true fat. Simultaneously, he stopped having frequent minor illnesses.

If any of these risk factors apply to you, you are vulnerable to food reactions.

You are not just what you eat.
Fat can be caused by many factors.
Food is just the most obvious one.

Now I’ll tell you how food reactions develop within your body, after you engage in these risk factors. Once you understand how food reactions work, you’ll be better able to stop them — forever.

Do you have Food Cravings? Food Cravings Test

  • Do you frequently eat until your stomach is uncomfortably full?
  • When you get hungry, does it make you feel tense, weak, or irritable?
  • When you get hungry, do you sometimes focus on one or two specific foods?
  • Do you snack often, usually eating the same snacks?
  • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
  • Diet Start
  • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
  • Do you usually need dessert after dinner to feel satisfied?
  • Do you tend to eat a relatively narrow range of foods?
  • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
  • Do you sometimes feel as if you lack control over what you eat?
  • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
  • Do you binge on food more than once per week?
  • Even if you know a food doesn’t agree with you, do you eat it anyway?
  • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
  • When you eat one of your favourite foods, does it generally improve your mood?

If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

WORKOUT ANYTIME on WFMY News 2

WORKOUT ANYTIME on WFMY News 2

The WFMY News team had WORKOUT ANYTIME Franchisee Jeff Cook on the show to talk about how to do explosive exercises in just a few minutes each day. Mary Anne Mills from WORKOUT ANYTIME was also on the show from WORKOUT ANYTIME and they went through 4 different exercises that can be done at home to burn calories fast. In the next segment Mary Anne and Jeff went through exercises that show moms how they can work out while being pregnant. Mary Anne goes through exercises that build up endurance for labor and how to keep off weight while some moms “eat for two”. They went through the different cardio machines that keep the baby safe and go through a donkey kick exercise. Lastly, the station mentions where the WORKOUT ANYTIME is located in Greensboro and how to get more information on personal training sessions.


You can view the full segment here. 

Kaempferia Galanga Plant Benefits For Health

KAEMPFERIA GALANGA PLANT BENEFITS FOR HEALTH

Kaempferia GalangaPlant Benefits For Health – Coughing often makes your activities disrupted, but it also would make other people around us will also feel comfortable around us. There are several types of cough, which most often is a dry cough and cough with phlegm. Coughing up phlegm is sometimes more torturous than dry cough, throat full of mucus because who wants removed.
Now this many drug manufacturers are already providing various types of cough medicines, ranging from syrup to tablet. Besides the chemical drugs, you can also wear traditional homemade cough medicine with natural ingredients that are easily found on the kitchen, which is Kaempferia Galanga and salt.
Kaempferia Galanga Plant Benefits For Health - 1
Prescription cough simple and traditional ingredients that have long proven to thin the mucus, making breathing until you feel more relieved and able to relieve cough with phlegm. At the moment we are taking this medicine traditional productive cough, a sense of warmth will make the body as well as the respiratory tract would be more relieved.
·      Powder, How to make it quite easy. Take Kaempferia Galanga, wash clean, and peeled and grated Kaempferia Galanga and squeeze and take the water, add a little water, put a little salt and stir well, Drink the potion after breakfast and before bedtime.
Kaempferia Galanga Plant Benefits For Health - 2
·      Ginger can also warm the body and treat cough with phlegm. You are experiencing a productive cough is highly recommended to drink warm ginger juice in at least once a day. How to make even very easily by slicing ginger and Kaempferia Galanga, then boiled and taken water juice. Water juice that will be taken.
·      Orange juice, have been many people who have felt that Lime is already mixed with soy sauce efficacious to treat cough with phlegm. If you do not like soy sauce, can mix with Honey Lime. Drink Lemon juice with soy sauce and honey as much as 2 to 3 times a day
Easy is not it? good luck and hopefully this traditional herb cough you get well soon. Hopefully article about Kaempferia Galanga Plant Benefits For Health we share this day can be beneficial to readers. Thank You.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

This small apartment is an example of how to make the most of a limited space.This live well in apartments provided with large windows giving good natural light, open spaces and good storage options, including a large sub basement. The lounge is spacious and decorated in bright materials.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

Upstairs is a beautiful model Dutch prosecutors. Create the mural are welcomed into a room like this.The the kitchen is located between the lobby and hall, and it offers plenty of cooking space. It is an ingenious closet in the hallway. As you can see, the secret of this event to find creative storage.

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

The Benefits of Jump Training

Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
  
There are three distinct phases to jump training:

The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

There are many benefits to jump training including:

Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

And More: Deals and Sales – End Of The Month Specials (February)

The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

Sniper Elite Nazi Zombie Army Sale Page
Sniper Elite Nazi Zombie Army 2 Sale Page

also on sale
Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
Alternativa is on sale for only $1.29 (90% off)
The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
Moto GP 13 is $12.00 (70% off)

Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

(click image to see Full Size)

also on sale
Bioshock is $4.99 (75% off)
Bioshock 2 is $4.99 (75% off)
Bioshock Infinite is $9.99 (67% off)
Borderlands, Game Of The Year Edition is $7.49 (75% off)
Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
Duke Nukem Forever is $4.99 (75% off)
Civilization V is $7.49 (75% off)

GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

(click image to see Full Size)

also on sale
Call of Juarez: Gunslinger is $9.72 (46% off)
with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
Sniper Elite V2 is on sale for $7.50 (75% off) or get the
Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
and last but certainly not least
The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

Limitations of Organization Capacity Assessment (OCA) tools

Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

The markers that I identified were:

1. The organization starts adding parallel value chains to the existing organization structure.

2. Organization does not move forward or backwards in the value chain

3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

4. History of young star performers leaving the organization on a continuing basis

5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

6. Long serving staff in a particular discipline / technology / expertise

7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

9. Large number of managers based on technical areas as opposed to value addition

10. Staff do not take up higher education or professional development

11. Average age of staff moves parallel to the age of the organization

The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

They were:

  1. Long serving staff in a particular discipline / technology / expertise
  2. History of young star performers leave the organization on a continuing basis
  3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
  4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
  5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
  6. Large number of managers based on technical areas as opposed to value addition
  7. Average age of staff moves parallel to the age of the organization

In addition they displayed the following:

  1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
  2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

Spotted in a hoarders driverway

the front yard was covered in a variety of junk.

Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

WTH ? How do both front tires blow up simultaneously?

for the original version, click though on the video below, which will only play on youtube itself

After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

My Trip to Bangladesh June 2011. Cont…..

The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

Does Weighing Yourself Help You to Lose Weight?

Do weight changes translate into fat loss?
On a day to day basis a scale is an extremely poor tool for giving you information on changes in bodyfat levels which are very small.  Daily weight changes are mostly accounted for by four factors:  bowel movements, urination, starch and sugar intake, and blood volume.    Since your blood volume typically does NOT vary that much the other factors are more relevant.
Bowel Movements and Urination vary a lot between different people anywhere from 1.3lbs to 5.7lbs in a single day.    This is one of the reasons to consistently weight yourself after you wake up and go to the bathroom and before you eat or drink much.
However, the biggee when it comes to daily weight fluctuation, is usually glycogen storage levels.    Glycogen is just the storage form of glucose aka blood sugar.    All starch and sugar ultimately end up as glucose, glycogen or fat.     
For example, on the front end of a low carb diet you will show big weight loss which is almost all water because you store glucose/glycogen with water – hence the term carbo “Hydrate”.  Muscle and organs contain the highest levels of water, and this is significant because most of your bodyweight comes from muscles and organs. 
  
So daily changes in weight are NOT a good reflection in changes in bodyfat levels!
Can daily weighing help with long-term weight loss and fat loss?

In order to answer this question let’s review the scientific studies that have looked at this issue.     The recent advent of WIFI scales is allowing much more accurate weight records because prior to that people had to take the time to write down their weight each day.
In a recent WIFI scale study called the Weight Trial here were the results:
Over a six-month period, those who weighed daily lost about 13 lbs more than the control group.
Even those who weighed themselves up to five times each week lost less weight than the daily weighers.
Daily Weighers were more likely to do things like eating less food and watching less television so clearly the weighing helped by changing behaviors!
Although this study did not measure body fat, it is quite likely that the body weight loss did translate into significant fat loss.
For certain groups, daily weighing is a bad idea such as people with eating disorders and other psychological disorders including extremely low self-esteem.     In addition, daily weighing does not work for everyone.   For some people the inevitable plateaus or variations in weight loss can very frustrated and quit the whole process!

So daily weighing may be helpful for you, but it is not perfect and it does not accurately measure changes in bodyfat levels so it is important to do use some method of body composition testing to measure these changes which should be your ultimate goal!

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

  • capture points
  • shields
  • generators
  • spawn rooms
  • terminals
and more…
In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
[A separate tutorial for an Amp Station can be seen here:
http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
Enjoy and See You In the Game!

My trip to Dhaka, Bangladesh

It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

July Currently

How did it get to be July already?!?!

I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

Have a great weekend!

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

Low-carb lifestyle guidelines

By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

The general principles

Cut out all unhealthy refined carbohydrates.

  • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
  • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
  • Eat more high-quality protein — organic if at all possible.
  • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
  • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
  • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

Diet Start

DIETARY MYTHS

Myth: skipping meals is a good way to lose weight.

Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

Myth: eating after 8 pm causes weight gain

Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

Are you all fired up?

You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

DIETARY MYTH

Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

My Trip to Bangladesh Cont…..

The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

WORKOUT ANYTIME Featured in Black Enterprise

WORKOUT ANYTIME Featured in Black Enterprise

Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
You can view the full article here. 

The Incredible Pistol Squat

The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
Pistol Squat Progressions
There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

The 1 Minute Workout

The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
1 Minute Workout Protocol

Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
running, jogging or cycling depending on your preference and fitness level.
Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
Do active recovery at a light pace for 2 minutes
Perform another 20 second sprint at your best possible pace.
Do active recovery at a light pace for 2 minutes
Perform a third and final 20 second sprint at your best possible pace.
Cool-down for 2 minutes.
Total workout time – 10 minutes!
Frequency

Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

Workout Fuel Conclusion

Workout Fuel Conclusion

WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
Workout Fuel | WORKOUT ANYTIME

Number Talks Book Study – Chapter 2

The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

The popup that comes up for some people, every time they start Vegas

The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

  • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
  • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
  • Rename (or delete) the file. That’s it! 

Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

**Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

Enjoy popup-free video editing once again – and See You In The Games!

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR TEENS

SMALL ROOM DESIGN FOR TEENS

There were many children inside, but somehow neglected to share ideas on the bed and adolescents. We will try to catch it from that position, where we’ll show you 10 ways to decorate the room of a teenager. Of course, these designs are aimed at age group 9-14 years and do not include all decorations eccentric but warm and relaxing colors. There are plenty of shelves for CDs, books and magazines, then we are also dealing with students of consciousness. I especially like the pictures on the wall of cartoons in black and white as they seem to bring personality into the room.

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

Chronic Illnesses and Diet part 3

Visualization and Chronic Disease

To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

Diet Start

About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

Peanut Benefits for Health

PEANUT BENEFITS FOR HEALTH

Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
Peanut Benefits For Health - 1
Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
Peanut Benefits for Health
1. Helps To Increase Fertility
For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
2. It Can Prevent Painful Gallstones
During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
Peanut Benefits For Health
3. Can Help Reduce Depression And Stress
Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
4. Can Improve Memory
The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
5. Lowers Bad Cholesterol
Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

RELAXING BATHROOM MODERN DECORATION

Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

LUXURY RELAXING BATHROOM LUXURY DESIGN

RELAXING BATHROOM LUXURY DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM STYLE

LUXURY RELAXING BATHROOM STYLE

5 Ways to Use iPads in Math

Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

1. Build a Math Notebook in Evernote



Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

2. Reinforce concepts or conduct inquiry research with math movies.

BrainPop
Khan Academy



Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

3. Make math movies to assess understanding

Show Me

Explain Everything

I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

4. Make a Vocabulary Notebook in Keynote

Keynote


I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

5. Use QR codes
Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

And we’ve used QR codes to help check homework assignments. I’ve written about that here.

I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

How do you use technology in Math?

Men’s Body Click Diet part 4

Benign Prostatic Hypertrophy and Prostate Cancer

Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

Diet Start

Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

Authors Are People, Too!

Oh, bloggy friends, I have missed you! This year is kicking my behind! I had high hopes that I’d still be blogging with great regularity this year, but alas…between my 28 awesome fourth graders, the start of my PhD, and my incredible two-year-old daughter, time is an oh-so-precious commodity. By the time my little one makes it to bed at night, I. am. wiped. out. And then I usually have textbooks to read and papers to write. But not today.

Today, I wanted to share with you the very awesome author visit we had at my school.

Granted, it’s old news by now. It happened during the Decatur Book Festival on Labor Day weekend, which, by the way, is one of the coolest things you can do in the Atlanta area if you’re ever here for Labor Day. But my experience was cool enough that I still wanted to share…four weeks later…

Every year as part of the book festival, 1 or 2 children’s authors come and talk at our school. This year, the fourth graders got to listen to Chris Grabenstein. If you’re not familiar with him, you should seriously run, not walk, but run to get his new book, Escape from Mr. Lemoncello’s Library.

This book is the story of Kyle Keeley, an avid game-player who wins a contest to spend the night in the new library built by master game-maker Luigi Lemoncello. As Kyle explores the library, however, he realizes that winning the contest was just the beginning, and a whole new game with high stakes, twists, and turns is starting. It reminds me a little of Willy Wonka and the Chocolate Factory, and Roald Dahl is just one of many authors referenced in the book. It’s very clever, fast-paced, and entertaining. I started it as a read-aloud when we found out that Mr. Grabenstein was coming, and we seriously couldn’t put it down. It was one of those books where I’ve had multiple students go out and buy it on their own because they couldn’t handle waiting for us to read it in class. It’s way up there on my recommendation list.

Mr. Grabenstein definitely inspired the students as writers. He shared a lot about his writing process, but his overall message was to just let it flow without editing yourself. To illustrate that, he modeled writing a story for the students. Prior to starting, he gathered 5-6 random words that students had written on sticky notes. He stuck those in his back pocket. Then, he projected a crazy picture.

He explained the difference between a protagonist and an antagonist, and he encouraged students to “Ask yourself, ‘what if…?'” He said that there are always a few questions you need to think about when planning a story.
  • Who is this guy?
  • What does he want?
  • Where is he?
  • Who wants to stop him?
  • Why?
He then took student suggestions to answer those questions and plan his story.
Next, he had students come up with a starting sentence: “My face hurts,” and an ending sentence: “He ate radioactive iridium isotopes” so we would know when his story was starting and ending. And then he just started telling the story. It was hilarious! At various points throughout the story, he would pretend to be stuck and pull a word out of his back pocket, and no matter what it was, he just rolled with it. He has a background in improv comedy, so I suspect that helps. Still, it really hit home the message that you shouldn’t censor yourself while you’re drafting — you can always go back and change things later if you need to. When you’re drafting, you should just let it flow to wherever creative place you’re led. 
 We were pretty inspired by his presentation, and we went back to the classroom to a) write, and b) read more of his book. The kids were so excited! We were totally unprepared, however, when he came into our classroom about an hour later. (So unprepared, in fact, that some of my students were still working on their vocabulary tests on Spelling City!) 

Usually when authors have come to our school, they’ve given their presentations, signed a few books, and then split. Mr. Grabenstein went above and beyond, happy to spend his day engaging with the kids and taking an interest in what they were doing. They barraged him with questions, and he answered openly and honestly, encouraging the kids the whole time. Needless to say, Mr. Grabenstein has secured quite a fan base in Eberopolis.

In the weeks since his visit, we’ve had countless conversations in writing about some of the little tidbits Mr. Grabenstein shared with us, but more than anything, I loved that my students got a chance to see that authors are real people, too. They have good ideas and bad, writer’s block and inner editors just like the rest of us. But they power through those hurdles, and we get some fantastic books as a result.

Thank you for visiting us, Mr. Grabenstein. It was definitely a highlight in our year.

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

Managing the Work/Rest Ratio in HIIT Training

High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
Fixed Work, Fixed Recovery
This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
Fixed Work, Variable Recovery
In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
Variable Work, Variable Recovery
This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
Have some fun and experiment with each of these to prevent plateaus in your workout progress!

And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

An example of the Black Friday Weekend Sales for 2013 on Steam

A small example of the Black Friday Weekend Sales for 2013 on Origin

An example of the Black Friday Weekend Sales for 2013 on Gamefly

See You In The Games!

HOME DESIGN FULL OF COLOR AND INSPIRING

It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

Home Design Full of Color and Inspiring

Home Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

See You In The Game!

Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

Updates on that World as I play more – but for now I have to stop and take another break. More to come!

Total Gameplay Time: ~2.0 hrs

Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
Total Gameplay Time: ~ 5.0 hrs


Update, Monday 9:30 AM MST: Well I played as much as I could… 
In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


Total Gameplay Time: ~ 10.0 hrs

Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

Total Household Time: ~23.0 hrs


Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

Health Concern: FAT? continue…

How much Fat do you Need?

Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

Diet Start

Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
(Click to see Full Size)

Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

[Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

What Kind of Protein is Best?

There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

Diet Start

The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

HOME DECORATING WITH ASIAN STYLE

Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
(Reduced size, framerate and quality, to fit Upload requirements at Steam)
Click to see slightly larger Full Size
On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
[Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

Try it out on your next Character perhaps – and have fun in Fallout 4!

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

NYC INTERIOR DESIGN FIRMS STYLE

NYC INTERIOR DESIGN FIRMS

NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

“My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS

Are You Ready for NaNoWriMo?

I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

Who’s in?

Tempura Mazel

Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

Diet Start

  • 5 asparagus, cut into 2 or 3
    long diagonal pieces
  • 1-2 large carrots, sliced 1/4″ thick on diagonal
  • 10 green beans, ends trimmed
  • 2 small zucchini, cut into thick sticks
  • 1 bell pepper, cut into strips, pith and seeds removed
  • 6 shitake mushrooms, soaked in warm water
  • 6 large parsley sprigs, stems removed, dried
  • 4 Nori seaweed, cut into quarters (available in Japanese markets)

Clean and cut vegetables; make certain they are dry.

Batter:

  • Ice water
  • 21/4 cups flour
  • 3 egg yolks
  • 11/2 quarts safflower oil (more if using sauté pan)

Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

Chilis Mazel

  • 6 fresh green chilis
  • 1 recipe Mazel Cheese Mexican, warmed
  • Ice water
  • 3/4 cup flour
  • 1 egg yolk
  • Safflower oil to deep fry (about 11/2 qts.)
  • 1 recipe of cooked Salsa Mazel

Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

Drain on paper towels.

Served cooked salsa over chilis.

YIELD: 2 servings.

The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

Rörstrandsgatan Popular Extraordinary Penthouse

Extraordinary penthouse in the popular Rörstrandsgatan.

Extraordinary penthouse
Extraordinary Penthouse
This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
LivingsRoom
LivingsRoom

BeDroom Design
BeDroom Design

Bathroom Desing
Bathroom Desing

Design Schema
Design Schema

Spending Your Money Wisely with Quality Food

Wherever possible, it is best to grow your own food. This is a help with the family budget. But many excellent articles of food may not grow well in your particular locality. They must be brought from a distance and exchanged for cash. If you are on a limited budget, how can you spend your money for the greatest value in food? This is a very practical question.

Foods which are manufactured and refined usually cost much more than those in the natural state. At the same time there is danger that some of the minerals and vitamins have been lost in the manufacturing process. In such a case you lose out in two ways, first, by paying much more for the product, and second, by the loss of essential elements from the food. This is not a wise way to spend a large portion of your money. Do not be carried away by all the glowing advertising material on the package or container.

Take the question of breakfast cereals so widely advertised today, particularly those flakes that have been coated with sugar. Such breakfast food is scarcely worthy of a place on your table and in your family budget. Dry cereals in any form offer less nourishment than do the raw materials from which they are made. Much of real value is lost in the manufacturing process. And when a sugar frosting is added, the effect on young children is far from good. That sugar coating is the worst feature of all. This excess sugar increases the possibility of dental decay and often results in chronic indigestion as well.

Diet Start

Cereals and similar products that are cooked at home are much less expensive than those that are already prepared. The same is true of breads baked at home. They, too, are more nutritious. It does take time to prepare such food. But in the end this saves money, and the whole family will be healthier and more satisfied.

People in well-to-do households may not have much trouble in selecting an adequate diet, provided they take the time to do so. Unfortunately, most of them do not bother. They just eat what comes their way or what is advertised over radio or television. This haphazard way of living is likely to result in serious deficiencies.

The family with limited means must be even more alert to the problem of selecting a diet that is suitable, but not too expensive. They must not allow themselves to be swept away by the flood of advertising so prevalent today. They must buy wisely and well.

Those who live in the country may find the situation a little easier. A small garden, with a few hens and a cow, may enable such a family to live far better than one whose means are not limited. Everything depends on the choice that is made.

Actually you can feed your family better than you think you can. But it does take a little planning. However, people who live on a well-balanced diet are naturally happier and healthier. Such a diet need not be an expensive one. In fact, there are many experiments in rats and other animals showing that a less liberal diet tends to promote a longer life. Many modern nutritionists believe that we live on only about half of what we eat. The rest only compels our hearts and other organs to work that much harder to get rid of the extra food.

Experiments at Cornell University seem to bear this out. A certain number of white rats were used. Some were allowed to eat all they wanted whenever they felt like it. Others were placed on special diets when they were in a rat’s “middle age.” Those rats which ate as they pleased lived 600 days or less. Those on the diet in middle age lived over 1,000 days. The oldest rat lived 1,400 days, and he never had a square meal in his life! It is not the quantity of the food, but the quality, that counts.

Planning Better Meals

Some people become confused over such scientific terms as calories, vitamins, minerals, and so forth. This is quite understandable. But don’t let this scare you too much. Today you can balance your diet fairly well without knowing very much about these various terms. Without going into too much detail, you can reach a good middle-of-the-road plan that is almost foolproof.

During recent years nutritionists have worked out what is known as the “basic seven” food groups. If these foods are included in the diet each day, they will meet the needs of the whole family very well. One does not have to bother with all the endless details of a complicated diet. Just follow this basic plan.

These seven food groups are easily recognized. They should become the foundation of each day’s meals. Some foods from each should be in one meal, others in another. But these essential things should always find a place at some time in the day. Other things may be added as desired. But it is best not to get too far away from this simple daily program. If any of these basic groups are missing in your daily planning, your diet is likely to be deficient in some things that are vitally important to good health.

Sample Dining Room Minimalist Design Idea

Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Sample Dining Room Classic DesignSample Dining Room Classic Design

Sample Dining Room DesignSample Dining Room Design
Sample Dining Room Elegant DesignSample Dining Room Elegant Design

My Trip to Manila, Philippines

The assignment in the Philippines is to review a Strategic Plan which has been developed with the assistance of another consultant. On first glance of the plan it was not constructed in a logical way. The SWOT analysis was not used to look at strategic options. The whole plan is just a list of SWOT elements and clubbing of current activities in to 12 areas of work and finally selecting 6 areas which they call strategies and allocating opportunities and threats that are relevant to these selected 6 areas. They have not used the strengths and weaknesses.

The previous consultant does not seem to have a grasp of the logic in strategic planning; the need to start with the external factors that influence the organization and then move inside the organization.

The staff of the organization also seems to be very new to planning let alone strategic planning and have an aversion towards prioritizing and selection. As usual they seem to want to do everything. So all in all the previous plan does not have a logical flow as well as the choices the organization has made in order to mobilize resources and achieve the mission.

My task of reviewing the strategic plan was made a lot more difficult as there were representatives from a funding organization who along with the staff thought they knew everything and in reality they “did not know what they did not know”. I some times wonder why they hired an expert if they think they know everything.

They are more interested in retrofitting “logic” in to the current plan! Go figure! In effect they want to create a strategic plan breaking all the rules. I had a tough time to pull them into the right path. It seems that the organization/staff are not willing to change their current operating mode of adhocracy to a more strategic, structured logical way. So I explained that until the willingness to change is there the strategic plan will continue to be just a piece of paper.

Now I have to do the documentation. Hope to finish it as soon as possible. Looking forward to returning to Colombo; Manila is too noisy for me and for some strange reason I do not seem to like Manila. Well I have finally found a city that I do not like.

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
You can also view the full article here.

In Defense of Classroom Technology

Usually when I talk to people about the fact that I teach in a 1:1 iPad classroom, they think that’s awesome. But now and again, I’ll run into someone who thinks handing a kid an iPad in school is an atrocity, and I feel like I have to defend the work that I’m passionate about. This happened to me recently at a social event when my attempts at small talk quickly turned into a debate about what we’re “doing to kids today.” The naysayers certainly exist, and this particular encounter made me pause to think about why I feel so strongly about this topic.

Here are some of the reasons I feel it’s in the best interests of both students and teachers to maximize the use of classroom technology.

My students explore constellations on their iPads.

1. It teaches real-world problem solving skills.
Being good at technology is largely a result of being willing to experiment and fail. I wasn’t born knowing everything there is to know about iPads or Evernote or Edmodo — I’ve learned by trying different things and seeing what worked and what didn’t. When I can’t figure it out on my own, I talk to others or look for the information I need online. Now I get to see these skills in my students. Whenever they need to troubleshoot something, they work together to find a solution. They don’t give up or think it’s impossible. In this high-tech world, these skills are going to be incredibly valuable.

2. It facilitates better communication between home and school.
If parents want to know what we’re doing in class each day, they can find all of our homework and activities on our class website. If they want to monitor grades or see what assignments are missing, they can look on Edmodo. If they want to know what their child’s behavior was like at school today, they can look on ClassDojo and get a report. If they want to know what their child sounded like reading a 4th grade leveled text at the beginning of the year compared to now at the end of the year, I can pull up the child’s audio recordings on Evernote. Technology makes it easier for parents to know what’s happening in school, and I’m happy about that.

3. It makes students better writers.
Without question, writing skills are incredibly important. When I think back on all of the essays I had to write in high school and college or the cover letters I wrote to get opportunities I have today, I know that my ability to write mattered. Technology makes students better writers for a variety of reasons:

  • It makes them more open to revising and publishing their work when they don’t have to handwrite the whole paper over again.
  • It teaches them typing skills that will make them more efficient at writing and therefore able to write more. 
  • It gives me more opportunities to give them feedback about their writing because I can easily collect samples at various points. I can have them turn in a copy of a draft wherever they’re at without interrupting their work because I don’t have to collect a notebook. 
4. It keeps kids engaged.
I used to have students write book reports. Now I have them write book blogs on KidBlog and make book trailers using iMovie. It’s basically the same assignment, but now students are motivated and engaged to complete it. They have an audience of their peers that makes their work more authentic, and it’s something that can’t be easily replicated without technology. The effort and outcomes my students experience because of technology is something that should be encouraged.

5. It benefits all types of learners.
I think a lot of the criticisms of technology assume that students are being passive consumers of it — watching videos or playing video games all of the time. Without question, technology could be used as a high-tech babysitter, but that’s not how it’s being used in my classroom at all. When my students use their iPads, they are active and interactive, and they’re expressing their creativity in so many ways now. They’re making movies, writing stories and articles, becoming budding photographers, and interacting with the world and each other in new and exciting ways.  They’re still collaborating and developing the interactive social skills necessary to be productive citizens of society.

6. It keeps everyone more organized.
I can’t begin to describe how many minutes I’ve lost over the last 6 years because students couldn’t find a paper or a notebook. Then once it was turned in, I’d have to shuffle through piles of nearly 30 to find what I was looking for. Add to that the fact that students work at different rates and finish tasks at different times, and you have the potential for an organizational nightmare.

I’m a pretty organized person, but without any hesitation I can say that technology has made my students and me substantially more organized. Everything we need can be found on an iPad or a computer. There isn’t instructional time lost finding materials or planning time lost figuring out where I filed that lesson idea or who is missing work. It’s all in one spot.

7. It allows me to give better feedback.
My students recently took a multiple choice test on Edmodo. I’d entered the correct answers before giving the test, so when I went to look at the results, it was already graded for me. Rather than spending time rifling through a pile of papers to mark answers right or wrong, I was able to type specific feedback to the students. For example, when several students missed question #6, I typed 2 sentences explaining the problem with the answer choice they selected and why the other choice was better. With the help of copy and paste, I was able to give that feedback to all applicable students in less than 5 minutes. How often do you think I could accomplish that in a world where I had to handwrite the comment 15+ times? It wouldn’t happen. I wish it could, but it’s not feasible.

8. It gives me more information so I can help students.
I routinely ask my students to solve math problems and explain their thinking. Sometimes they have to explain it in words and sentences, but other times I let them use their iPads to make short (30-60 second) videos narrating their solutions and the steps they took. Similarly, when I do reading assessments with students, I can use my iPad to record the student’s voice as the student reads. This creates an artifact that I can listen to, share with parents or RTI committees, and analyze in a way that wouldn’t be possible absent technology. It’s some of the best evidence of a student’s ability, and it helps me identify strengths and weaknesses so I can give students the support they need.

9. It makes me more efficient.
Anyone who’s a teacher can attest that this job sometimes borders on impossible. Teachers take on so many roles and have so many responsibilities that the stress can be overwhelming. I think that’s a major factor in why so many great teachers leave this profession within the first few years and why many capable individuals are deterred from entering the field. In my experience, technology has made this all more bearable. I don’t have to waste time shuffling through paper or hunting for files anymore. I don’t have to haul carts — literally carts — of student work and planning materials home anymore. I can find exactly what I need wherever I’m at because everything is electronic. It’s made me much more productive and efficient, and everyone benefits as a result.

10. It’s appropriate for the world we live in.
I know a lot of people lament the fact that we’ve moved into an age of technology. I’m not one of them, but even if I were, I recognize that there’s no going back now. I’d rather introduce students to technology in safe, structured ways where I can guide them through the perils and pitfalls than leave them to struggle on their own. I also like that I can show them how to make technology work effectively for them. I’m facilitating students to be productive, creative, and responsible users of technology, and I’m not confident they’d all get there on their own.

It’s not technology that’s an issue — it’s how the technology is being used. I’m certain that the ways my fourth graders use their iPads will make them better informed, more capable citizens down the road. Is it the only way to teach them? Absolutely not, but the advantages of using technology in the classroom far outweigh any disadvantages the devices bring.

What are the arguments for or against using technology in the classroom that you’ve heard? I’d love to hear your thoughts in the comments.

My trip to New Delhi & Hyderabad Cont……..

I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

The Amazing Power of Focus

I frequently like to put on music while I work, and I sometimes do that in my classroom, too. I’ve rotated through many Pandora playlists, and I use Spotify a fair amount. I like the music on those sites, but they’re more for entertainment than work.

I’ve finally found a resource that really seems to help me and my students get into the zone and focus.

Let me introduce you to my favorite new website, [email protected]

This website allows you to listen to instrumental music from a variety of genres that has been specially selected to get you into a state of “flow.” The music is sequenced in an order that draws on neuroscience and research about the impacts of music on productivity. They have a huge section documenting the science behind the playlists. 
I tried this site while reading some really dense texts for a PhD class, and I really felt like it helped me stay focused and productive. I cruised through the articles in record time! I also had it playing while I worked on writing this morning, and I do feel like it’s impacting my personal productivity. It seems to be helping my students as well. 
They have two membership levels — a free version and a paid version. The free version gives you 60 minutes of each playlist before stopping. You can listen to the playlists multiple times, but it will always be the same playlists. The paid version allows you to set a timer, customize playlists, listen to unlimited music, and track productivity for $4.99 billed monthly or $45 billed annually. I’m currently using the free version, but I suspect it won’t be long before I upgrade. It’s having a big impact on my productivity. 
If you like to have music on in the background while you or your students work, I’d definitely recommend giving [email protected] a try. I’d love to hear about your experiences with it in the comments!

I like www.focusatwill.com so much that I’ve become an affiliate with the site. This means that if you click the links above and subscribe, I’ll receive a very small commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Chronic Illnesses and Diet part 2

Chronic Inflammatory Illness and Insulin Resistance

Allowing for the fact that genetics affects an individual’s susceptibility to disease, the roots of chronic illness often lie in deficiencies of various nutrients, other dietary issues and hypersensitivity to foods and environmental factors, such as toxins. Whichever of these factors apply to you or your family, insulin resistance may be the easiest to recognize and correct. When you have this condition high levels of insulin, created by frequent intake of carbohydrates, spill over into biochemical injury that makes whatever you have worse. This can include asthma, eczema, colitis, depression, headaches, psoriasis and much more.

What is common to all of these problems is inflammation. Whether you’re looking under the microscope or studying its basic chemical reactions, inflammation is the same, wherever it’s found. Chronic cough and mucus; sore, swollen, stiff joints; cramps and diarrhea; a chronically red, itchy rash; or periodontal disease — all are inflammation. Even cardiovascular disease, which used to be called hardening of the arteries and is now called atherosclerosis, is recognized as a fundamentally inflammatory process.

Diet Start

The first step in the biochemistry of inflammation is the release of informational substances from injured cells that attract the attention of healing mechanisms, the way a phone call to the automobile club brings you roadside assistance. The aid mobilized by these cellular calls for repair work is usually limited to the immediate task at hand; it’s designed for mending a cut or recovering from a burn or fighting infection. But if the agent causing the inflammation persists or if something goes wrong with the signaling mechanisms involved in the call for help, the repair work and its accompanying signals (pain, swelling, redness and heat) may become stuck, leaving you with a chronic inflammation. Chronic inflammatory diseases are often described by medical terms that end in Itis’ and ‘,psis’.

Because the signaling mechanisms involved in chronic inflammation may be distorted by inappropriately high insulin levels in your body, this is something over which you have control. Controlling insulin levels through appropriate dietary changes, including reducing carbohydrate consumption or shifting most consumption of carbohydrates to the later part of the day, will result in a positive effect on the biochemistry of inflammation. Although this dietary change is not directed at a specific disease, it should be part of any comprehensive treatment since it is aimed at easing the predictably disordered chemistry of anyone with a chronic inflammatory illness.

Medications that simply squelch the inflammation may not always be the best course of treatment. Granted, there are instances in which the cause is long gone but the body has gotten stuck in some kind of inappropriate reaction. In these cases, subduing the symptoms temporarily may work. But it’s different when it comes to the daily, long-term application of steroid creams or the consumption of systemic steroids or anti-inflammatory drugs. These treatments have some fairly dreadful gastrointestinal side effects, including the tendency to create leaks in the intestinal walls that allow the entry of unwanted toxins, chemicals and allergens into the bloodstream.

The Body Clock Prescription for Treating Chronic Illness

Chronic illness makes you listen to your body. The message is not so precise that you know exactly what to change, unless of course it’s something like chronic cough in a smoker. Most of the time, chronic pain or other signs of inflammation don’t announce their cause. They demand that you do some detective work, presumably with the help of a professional who has good instincts and expertise at reading your body’s communications by carefully listening to your story, interpreting laboratory tests and then making educated efforts at trial and error.

Anyone with a chronic illness has to be especially aware of the second Tacks Law: if you are sitting on two tacks, removing only one does not necessarily make you feel 50 per cent better. This means that insulin resistance is just one of many manageable factors that may also include improving other aspects of nutritional status and looking for the trigger, irritant, allergen, toxin or germ to which your body may be responding.

Doing the detective work required to find underlying triggers of a chronic illness may take a long time; nor is it always successful. As a more generalized strategy, the ten steps of the Body Clock Prescription will not only prevent or tame insulin resistance, a major contributor to chronic illness, but will reinforce healthy body rhythms and foster rhythmic integration. Remember that flexibility is your body’s treasure; it enables you to be more like an orchestra, with its constant active effort to stay in tune and on beat, than a mechanical system. The same flexibility that allows you to fall victim to the negative effects of poorly timed eating, breathing, exercise or exposure to light also permits you to use such influences for your benefit.

WORKOUT ANYTIME on Cincinnati.com

WORKOUT ANYTIME on Cincinnati.com

The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
Workout Anytime

You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

Teenager’s Room Rockstar Design For Real RockStar

Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

Teenager’s Room Rockstar or Musician Themed

Teenager’s Room Rockstar or Musician Themed

Teenager’s Room Rockstar Design For Real RockStar

Teenager’s Room Rockstar Design For Real RockStar

Teenager’s Room Rockstar or Musician Design

Teenager’s Room Rockstar or Musician Design

My Trip to Bangladesh June 2011

The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

It’s Not Just You™ – The Elder Scrolls: Legends A.I. Seems Pretty Hard To Beat Now [Noticed]

Just a little notification that, if you are playing TES:Legends recently and find it’s quite a bit harder to beat the computer opponent (AI/NPC)… It’s Not Just You™

I was in the Beta for The Elder Scrolls: Legends; but never got around to finishing my “First Impressions” article on it [as is how it usually goes for me and posting, heh]. Legends has been out of Beta for a few months now, and if I could summarize the game in one paragraph, I would say that Legends is a Virtual Collectible Card style game, that is ‘both Single-Player and Multiplayer’ (you can play against other human opponents, in matches and “Arena” rounds – but you don’t have to, you can entirely play against the computer AI both in single matches and in ‘Arena playoffs’, if you desire). It is actually more of a “Card Collecting” game than a “Trading Card” game – as I have not seen a way to trade with human players yet – but that is similar to other ‘virtual card games’ of this genre, like Hearthstone and Gwent (“World Of Warcraft” Lore and “Witcher” Lore -based virtual card games, respectively). The game cannot be played Offline and you don’t actually get any ‘Real Life’ Cards of any form; but that again, is the same for the other virtual card games mentioned.

After playing a little bit when it was first Released, I didn’t play Legends for a few months, only recently picking it up again to play a bit – and boy was I in for a surprise!

The computer AI as it is now, offensive and ticked off
(Cropped Screenshot of art by Bethesda Game Studios)

Perusing the Updates for the game (which there seems to be one of every few weeks, a nice thing to see for a game!) – there was an Expansion for the game released at the end of June 2017 (Heroes of Skyrim) – but nothing that says, “We felt the AI was a little too easy to beat, so we beefed it up a bunch and it also will pull cards out of it’s butt hat, getting exactly what it needs at times, to win!” – so I’m not sure when this AI change occurred… [I didn’t play for a good few months or more, so sometime around mid-2017, I reckon].

Judging by the recent changes to the Computer Opponent A.I., get used to seeing this screen more often…

Legends is a fun game still, with it’s flashy effects and nice sounds, not to mention the wonderful Elder Scrolls-style ‘realistic’ art on everything; I personally don’t mind if I am going to be losing to the Computer a lot more; but it would have been nice to see a more obvious notification of it somewhere – or a way to perhaps adjust it (via a Slider or Dial or anything..).

I do think the AI was ‘just a little too easy’ at first, making simple moves and not many combos, losing a lot more than it won against me – but now it seems pretty darn hard – almost too hard, pulling multi-combos everywhere and buffing cards a lot more and getting ‘the perfect card’ or ‘just what it needs’ at times, to pull off a win (as though, instead of the AI having a prepared set of cards, cards seem now ‘generated as the game goes’, to “keep it competitive”). I can still win once in a while against the AI in Solo Play and Solo Arenas – and I understand that Bethesda might want to make things ‘a bit difficult’ to encourage selling Card Packs; but… Dearest Beth: It’s “Just A Little Too Much” Now… [in my opinion]

The ‘new’ Computer Opponent A.I. at work, busy buffing its’ cards to no end

I won’t stop playing, of course – and I won’t stop getting Card Packs once in a while (for all three of the Collectible Card Games mentioned above, when I can) – but I just wanted to mention this, for others too; that if you noticed the Computer seemed ‘tweaked’ lately and is now pretty darn hard to beat as an Opponent in Legends – It’s Not Just You™…

If I play some Versus matches, which I do from time to time – See You In The Game!

Addendum
Changes Seen:
– Increased Combination plays (Buffs, Debuffs, then Attacking)
– Increased Healing cards (Health added to Opponent)
– Highly Increased ‘instant-kill’ or ‘unsummon’ type “Destroy A Creature” cards (Piercing Javelin, Lighting Strike, Execute, Cast Out, etc)
etc.

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

Fast-Track principles

This is a diet, or a way of eating, that will:

  • Lower insulin levels and stabilize blood-sugar levels
  • Banish food cravings
  • Eliminate energy peaks and troughs, and mood swings

Enhance concentration

  • Re-educate you into a way of eating that will increase your vitality and improve your overall health
  • Help your body to burn fat and normalize your weight.

It is vital that you understand the principles of this diet and follow it responsibly. If you are fundamentally healthy, but insulin-resistant and experiencing any ofthe accompanying symptoms, this plan will help you redress the balance and find a level of carbohydrate intake with which your system can cope. The Fast-Track Plan offers you a kick-start and is aimed at women with a BMI of over 35 and men with a BMI of over 25.

Diet Start

For the period of this plan you base your diet on an approximate ratio of 50 per cent high-quality protein/20 per cent low GI carbohydrates/30 per cent healthy fats. You begin the first two weeks of the diet by restricting your carbohydrate intake to 20g (3/4oz), your protein to 150g (5oz) Biological Value and healthy fats to a minimum of 40g (1 1/2oz). On a very simplistic level this means:

  • 3 cups low GI vegetables per day.
  • 1 portions of protein three times per day and portion twice per day as a
    snack. (A portion of protein is the equivalent to the size of your palm.)
  • Around a half to a whole teaspoon of allowable fats at every meal.

Within 48 hours your body will start to burn its own fat as fuel, as your body switches into benign dietary ketosis.

Ketosis

Being in ketosis means that your body burns fat because it isn’t taking in sufficient glucose to meet your energy needs. Under everyday conditions the carbohydrates that you eat are converted to glucose, which is the body’s primary source of energy. Whenever your carbohydrate intake is limited to a certain range, for a long enough period of time, your body will draw on its fat stores — turning this into a source of fuel called ketones. When you burn a larger amount of fat than is immediately needed for energy, the excess ketones are discarded in the urine.

Dietary ketosis has received a bad press because it is often confused with ketoacidosis, a life-threatening condition most often associated with insulin- deficient, type 1 diabetes.

Benign dietary ketosis, however, is a natural adjustment to the body’s reduced intake of carbohydrates, as the body shifts its primary source of energy from carbohydrates to stored fat. The presence of insulin keeps ketone production in check so that a mild beneficial ketosis is achieved. Blood-sugar levels are stabilized within a normal range and there is no breakdown of healthy muscle tissue, as long as sufficient protein is included in the diet.

Measuring ketosis

On a rapid weight-loss diet you will usually start to burn fat instead of sugar within the first 48 hours. To measure the ketone levels in your urine, buy urinary test strips, called lypolisis strips, from any pharmacy, which will show you if your carbohydrate/insulin balance is at optimum levels for fat burning. You should do this twice a day: before breakfast and before your evening meal. Your levels need to be between trace and small (0.5-1.5 mmol-l).

Caution: if your levels rise to above moderate (4 mmol-l), you are not eating enough and should increase your low GI carbohydrates until the ketones are reduced to between trace and small (0.5-1.5 mmol-l). Always drink plenty of water: at least eight large glasses per day.

Paperless Mission #8: Conduct and Archive Running Records (iPad)

This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #8: Conduct and Archive Running Records 

At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

Paperless rocks. The nightmare is over.

In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

Step 1. Download all of the running records to a folder on Dropbox.

You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

Step 2. Import the guided reading assessments into your GoodReader app.

Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

Step 4. Use the annotation tools to mark up student reading as you normally would. 

I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

Step 6. Move the renamed running record over to the student’s notebook in Evernote.

To get there, go into Manage Files again, and then select Open in. . . 

You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

Extra Credit: Create a simultaneous audio file in Evernote.

This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

Thanks for reading!

MINIMALIST RA HOUSE DESIGN BY BAQUERATTA

The Minimalist RA House was designed a Tokyo company called Baqueratta.They have a good past in minimalist small residences.The entire house was furnished with modern and minimalist furniture.I love this house and I hope to have someone in future, but I especially like the bathroom.

Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
You can view the full article here.
 

Easy or Hard to Digest

The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

Diet Start

These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

Dietary Fiber

Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

“We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

  • Go to Raptr.com
  • Sign in to your Raptr account
  • Click to get your gameplay data

If you have any other questions, please send us feedback.

We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

Dennis “Thresh” Fong
Co-founder and CEO”


Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
(Click to see Full Size)

At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
(from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
(Click to see Full Size)

There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
(Click to see Full Size)

As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
(Click to see Full Size)

While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
(Click to see Full Size)

Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
(Click to see Full Size)

Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

WORKOUT ANYTIME on Entrepreneur.com

Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

Trip to Hyderabad Cont

The day of leisurely travel to Hyderabad turned in to an interesting experience for me. Here’s how it went.

There were of course no issues in getting to the Airport or getting checked in. At the checking counter I asked the Jet Airways staff if there were any restrictions of taking a bottle of liquor to India. At which point I was told “NO SIR”. When I checked in however they were unable to check my baggage through to Hyderabad since I was changing from International to Domestic (Still Jet Airways) I was told that I need to put my bag through customs at Chennai.

Things went smoothly from there; got through Immigration, went and bought 500ML bottle of Black Label, went through security, boarded and arrived in Chennai on time. Jet airways must be congratulated for on time flights between Colombo and Chennai. Their service too was quite good.

Things turned in to a big process when I got to Chennai. First I had to go through Immigration, it was smooth, then through Customs, also no issue, then physically had to come out of the International Terminal and go in to the Domestic Terminal. I was told that Jet Airways staff would be there to guide the transfer passengers, however there were no staff and there were no sings to direct. I asked for instructions and got to the Jet Airways counter without any trouble. Yes I did change some money as well. At which point I was told that I need to put my luggage through the security scanner again so had to Drag my bag to the end of the terminal and re-put the bag through the security scanner (X-Ray) then had to come back and join the line to check the bag in for a second time. Luckily there weren’t many passengers in line. While I was doing this I was also carrying the Duty Free Bag with the bottle of liquor inside it and in plain sight of the Jet Airways staff.

So I checked in the bag and went to the Taj Restaurant to quench my thirst; well things really went wrong there, apparently for some Gandhi commemoration the bar was closed. I thought I was back in Sri Lanka where for any frivolous thing they close all the bars. Never mind survived on a cool fresh lime soda.

When it was time for me to go through the security to board the domestic flight I had to put all my hand luggage again through the security… nothing new I guess. Then came the surprise they said “Sir you cant take wine in the plane, you have to put it into the main luggage” I promptly pointed out to the security guy that I am connecting from a International flight and that I did bring the bottle on board as hand luggage and I was told that it was allowed by the airline staff the time of boarding. “No sir it is not allowed in domestic flights” came the answer right back at me. Knowing not to argue with them went back to the counter. Then the fun started….. apparently the process was that they had to get my checked in luggage out of the cargo container put the bottle back in to the check in luggage then re scan the luggage through the X-Ray machine and so on. No drink can be worth all that trouble. They also agreed with me that the bottle might break in the luggage and I will have to wear a whiskey perfume during my stay in India.

So I was on the verge of throwing the bottle down the drain when one of the assistants who help with the luggage suggested to the girl at the counter to check the bottle in as a separate piece of luggage. That was funny; I had a grin in my face because it sounded ridiculous. But guess what, he got a small box put the bottle in, taped it up, put fragile stickers on it, and got the girl to weigh it. Guess what, the scale returned a value of zero kilograms. I thought now they are going to make a fuss again, but to my surprise no they checked in a weight of 2 KG the minimum weight of a check in luggage (Good to know I thought) and gave me a baggage tag. So I thought this is all going to be a waste as the bottle is surly going to break. So deciding to ignore a package with a streak of whiskey behind it at the Hyderabad Airport baggage belt went through the security and got in to the boarding area.

Then came the next surprise, the flight was delayed for two and a half hours. Man now I know why they don’t allow liquor in the domestic flights as they are apparently always delayed and they don’t want disgruntled customers having a few to get over their frustrations of having to wait for an eternity. Well that is the consensus of the few guys I got chatting to.

Finally the plan did arrive and I made it to Hyderabad. Went to collect the luggage and to my surprise the small box did make it intact. When I saw that it brought a grin to my face so get to the hotel and yes had a drink and went to sleep. So now from tomorrow morning I will be busy with the assignment. Looking forward to it.

Wauconda WORKOUT ANYTIME Opening Doors Soon

Wauconda WORKOUT ANYTIME Opening Doors Soon

The new Wauconda WORKOUT ANYTIME, owned by Jeff Cercy will be opening their doors by the end of the week. The club, located on Liberty Street in the Jewell Osco shopping center, will be celebrating their grand opening on March 22nd. The equipment is all in place and the final touches on flooring and painting has all been completed.

The public is welcome to come out and see the new club. Those interested in joining can call 847-526-4088 or register on the club’s website: http://workoutanytime.com/locations/wauconda.

Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

The “Fatal Graphics Error” message, when starting MTW2

I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
Click image to see Full Size

After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
Hopefully that works for you all, as it did for me.

See You In The Games!

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

HOW TO DECORATE WITH NO MONEY

In the present times, the expenses are rising for everyone and this is the reason why budgets have become tighter. Having less or insufficient money, does not stop people from wanting things or wishing for them. The house is the place, where one spends the maximum amount of time and everyone wants that they house looks nice and attractive. There is a myth that if one wants to decorate or improve the house; they will need to spend a large amount of money.

HOW TO DECORATE WITH NO MONEYThis is not true as it is possible to decorate the house or a room without any money also. One needs to be attentive and use their creativity and in this way they can make the house look nicer.

One of the easiest ways to decorate a room or the house is to use everything that is already available in the house. One can use things which are packed off as of being of no use or one can use the things that are there in the room. Many times, just re arranging the furniture and the things in the house can create a new look altogether. Changing the color scheme of the room is also a good idea. One can use combinations of colors to create a new look. Throwing in new and vibrant colors in a room is also a good idea. New colors break the monotonous look of a room and help one change the way the room looks.

Another way to change the way a room looks is to add a painting or a wall hanging to the walls. This is a great way as it gives a new dimension to the room. A plain wall does not look nice and adding something to it can give a great look as well. One should always work on the larger area of the house and then move to the small ones. The house can be decorated with existing things in the house, and one can easily use these and decorate.For example you can use some oriental rugs from bedroom to put under the coffee table from living room. It is not always necessary to buy new things and decorate. Using the creativity one can create focal points in the house, and use this to create a new look in the house. When the focus of a room changes, it itself gives a new life and a new look to the room and this is one of the best and the most affordable ways to decorate the house without money.

KITCHEN FURNITURE DESIGN GENAH MAK NYOOOZZZ

The first thing to remember is that the kitchen is a very functional piece, but do not want to look that way. You can purchase kitchen furniture that is warm, welcoming and friendly to both practical and effective. For example, you can choose from a variety of carts microwave carts or beautiful kitchen that fits well with the decor of your kitchen. They also give him the space to display items or the space room that can hold pots and other utensils. A kitchen island is another element that gives additional working space, but with the addition of a few bar stools that can transform a functional kitchen in a comfortable and welcoming.

Kitchen Furniture Design

Kitchen Furniture Design

Kitchen Furniture Design

Kitchen Furniture Design

My trip to Yapahuwa

I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

  1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
  2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
  3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
  4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

Fund raising activities in general falls in to the following broad categories.

  1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
  2. Event based (Tsunami, War, Earthquake, etc.).
  3. Faith based donations to religiously affiliated organizations
  4. Bi-lateral funds.
  5. Multi-lateral funds

There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

Giveaway Winner!

I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

I went to the Random Number Generator this morning, and drumroll…

I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

Have a great weekend!

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

[In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

In One Sentence™


A Battlefield Hardline

Main Weapons Overview


By: The Game Tips And More Blog


Presented in a Document-sorta-but-not-really format

I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

Rating Key (if applicable to weapon, when used):

? = Not sure [yet] if they are Criminals-only or Cops-only usage

* = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

Scout Elite = A fairly fast-shooting and silence-able sniper rifle with medium-high damage, this Default Professional weapon only improves with Unlocks. **

R700LTR (Cops) = A slow-firing but powerful killer that is silence-able, Magnum Rounds can be Purchased after 50 Kills to make Vehicles cry. *

AWM (Criminals) = Feeling much slower than the Scout – but also seeming more powerful – the first thing I would want to unlock is the silencer for this big boy.

388-Recon = Feeling like it has decent ‘punch’ and good range – if the Scout is “fast” and the AWM is “slow” then the 388-Recon is “middle-of-the-road”, in terms of rate of fire, it seems. *

.300 Knockout = What was once a fast and sleek one-hit-kill-machine, worthy of its’ lengthy and difficult Unlock, this rifle has since been Nerfed™ with a slower firing rate and its’ one-hit-kill ability taken away – and while still powerful and silent, to those who used it in it’s former glory, it is now a slow and decrepid version of it’s former self.

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M98b = This bolt-action sniper rifle packs a mean punch – it has so much power it can shoot pilots inside helicopters [I’ve done it! Once! lol] and has very little bullet drop-off – it can even be silenced, but it can it ever be equipped with a Straight-Pull Bolt (to allow you to shoot again without going out of scope) and its firing rate is pretty slow.

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

SOCOM16 (Cops) = A medium-damage semi-automatic rifle that can be silenced, it feels somewhat inaccurate – but it does have the ability to fire quickly.

SR-25 ECC (Cops) = A semi-automatic rifle that can be silenced, its decent damage along with its fast firing rate will make this a formidable weapon to use, if the medium-low recoil (which feels less than the SOCOM16) can be accounted for. *

M82.416 = Even though the firing rate of this un-silenceable rifle has been severely reduced since I last played with it in Hardline (with the ability to fire a number of times a second back then), it remains quite the hand cannon (firing about once every second now) – with so much power there is very little bullet drop (and it can still take out pilots inside helicopters) – I think it did more damage back then too, but it is still nice to use for the sense of power it brings. *

RO933 M1 = A silence-able rifle that seems to be able to fire as fast as you can click, I like to run this one with an Infra-vision scope, hide in the bushes – and let the bullets fall like hail upon the enemy from the shadows. **

SAIGA .308 = A fast-firing rifle, this one ‘feels fun’ to run with even though it is a little inaccurate, because it has decent damage output. *

PTR-91 = A rifle with mediocre damage, its’ fast fire rate can make up for it, if the medium-ish recoil can be compensated for.

SP-AR = Although fast-firing, this rifle isn’t very accurate while doing so, with its’ high recoil – at least it as a neat, unique ‘report’ [sound].

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, staying on the edges of the area, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).


RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

G18C = Although fast-shooting, this pistol feels a little inaccurate.

93R = With good accuracy and higher damage, this little bad boy can even be silenced, eventually. **

MAC-10 = While the recoil will have you shooting at the sky for the most part, this little guy will spit out bullets and damage faster than a shaken baby spits out broken teeth to make up for it – it’s just that you may be out of ammo before the enemy dies.

MP9 (Cops) = Surprisingly accurate if you can compensate for the recoil, this little fella doesn’t have much in the way of scopes, but it can be silenced after 90 kills. **

TEC-9 (Criminals) = Although fast-shooting, this little guy isn’t the most accurate puppy in the litter (but if you use the sights it does help) – it also doesn’t do the greatest damage, it seems.

IMPROVISED GUN = With decent damage output, decent accuracy and a nice ‘feel’ to it, this little fella is fast becoming a Personal Favourite. **


DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

870P MAGNUM = Although this is a slower-firing pump-action style shotgun, it has very high damage output and a little bit of range, too. *

SPAS-12 = While still a pump-action shotgun, the SPAS-12 fires faster than the 870P MAGNUM and it feels like it has a bit more accuracy, too – it just doesn’t do quite the damage of the 870P.

SAIGA-12 (Criminals) = With a nice rate of fire, it feels like it does damage somewhere between the SPAS-12 and the 870P MAGNUM. **

STAKEOUT (Cops) = With damage a bit lower than the 870P or the SPAS-12, shotgun ‘feels’ quite a bit more accurate – and with its’ nice rate of fire (for a pump-action), this beauty quickly became a Personal Favourite to run with. **

M4 (Criminals) = With a nice rate of fire and decent damage, this cannon is quickly becoming a Personal Favourite. **

KSG12 (Cops) = Although a pump-action shotgun, this thing hits like a horse’s hoof to the head – I dubbed this cannon the “Kiss The Ground” shotgun right away. **

1887 = Although powerful, this old-west-style shotgun shoots slow – when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

DOUBLE-BARREL SHOTGUN = A true source of unearthly power once unlocked, the DOUBLE-BARRELLED SHOTGUN will make you feel like a living angel of death, as even one barrel’s worth will end an enemy close by; just point this finger of god at an enemy and say “die” – and as long as they aren’t too far away – they will do it for you. Worth the effort to Unlock and a Personal Favourite. **

SA-58 OSW = I call this “The Recoil Machine”, as unless you fire one bullet at a time, you will be covered in rifle Recoil.

SCAR-H (Cops) = This silence-able machine gun has some recoil, but it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (especially if ‘tap-shooting’ for short bursts). *

FAL (Criminals) = Although this rifle has a fair amount of recoil, it seems to have high damage output – if it can be compensated for, this could be a nice heavy-hitting weapon to run with. **

HCAR (Cops) = With a medium amount of recoil, it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (even during continuous fire, if you can control the muzzle). **

HK51 (Criminals) = Although it has a bit of recoil, this silence-able rifle has a nice ‘smooth’ feel to it. **

SG510 (Cops) = With a nice feeling of accuracy (aimed fire, with recoil compensated for) it also feels like a decently-hard-hitting weapon – this could be a new Personal Favourite for me. *

M39 EMR = With a little less accuracy than the other Battle Rifles, the M39 EMR ‘feels’ a bit smoother though, with a nice rate of fire and the ability to be silenced – it’s just too bad it doesn’t have Extended Magazines available, as it always feels like it’s running out of ammo just a tad too soon. *

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

45T = This pistol doesn’t seem to do much damage, nor does it shoot very fast – but that slow rate of fire gives it decent accuracy.

.40 PRO (Criminals) = While this pistol is decently accurate, it only does mediocre damage and it doesn’t fire very fast – another enemy will probably kill you before the one you are shooting at dies, unless you ‘get the drop on them’.

M1911A1 (Cops) = While it doesn’t shoot very fast or do above medium-ish damage, this WWII-era pistol seems to be decently accurate – but it will win no awards.

BALD EAGLE = With huge damage output, this ‘Hand Cannon’ will feel like you are wielding a hand-size shotgun – too bad it can’t be silenced or have longer scopes put on it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

MP5K = Fast-shooting and if you can compensate for the recoil, pretty accurate – it even works great silenced. *

M/45 (Cops) = Not as ‘smooth’ handling as the MP5K, this SMG feels ever-so-slightly more accurate and has decent damage, to boot. *

MPX (Cops) = A fast-shooting and fun smg to run with, it seems to have a little less recoil than the other SMGs but doesn’t ‘feel’ as accurate, if that makes any sense – it is still pretty good and if you are able to compensate for recoil, a nice gun to use. *

K10 (Cops) = Insanely insane with an insane firing rate, it has been literally only for the insane since the Beta – and maybe those who don’t like keeping bullets in their gun – heaven help anyone if you point this at their head. **

FMG9 = Suppress-able at 90 kills, this fast-shooting SMG ‘feels’ more accurate than its’ kindred, especially after unlocking the Laser Sight and some Scopes – and with a unique stock animation, it is a ‘fun’ weapon to run with. *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

SCORPION = A fast-shooting gun (almost as fast as the K10 it seems), this silence-able fella ‘feels’ ever-so-slightly less maneuverable than its’ brethren – and it does a bit less damage, too – otherwise, it would have been a Personal Favourite (I have almost unlocked the Suppressor already on it). *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

UMP45 (Criminals) = Although slightly more accurate feeling, it also feels like it shoots slower and hurts a little less than similar weapons.

UMP9 = Silence-able after 70 kills, this SMG ‘feels’ a little bulky to wield, but seems like it does a notch more damage than its’ counterparts. *

UZI (Criminals) = Silence-able but unfortunately “The Uzi” in-game seems different than it does in the movies – it shoots far slower than on the big screen, but it is also more accurate here. *

M5 NAVY (Cops) = Making you feel like you’re in your own 80’s movie, the M5 NAVY packs a punch and seems to keep accuracy even out to mid-ranges (aimed or not) – quickly making this a Personal Favourite. **

M12S (Cops) = “The Spaghetti Uzi” ‘feels’ ‘clunky’ and a ‘bit’ ‘inaccurate’ to me, ‘but’ it seems to have a ‘few more’ bullets than ‘similar weapons’, which ‘mostly’ ‘makes up for it’, quote marks. *

AUG PARA (Criminals) = While this Criminal-only SMG ‘feels’ like it does decent damage and is fairly accurate, it ends up being only ‘mediocre’ in… well.. Everything.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them, until it shows up on the Kill Log… **

MX4 = Although very ‘average’ in all stats in-game, the stylish MX4 ‘feels’ like it is an efficient damage-wielding gun that is fun to use for some reason – I just kept on using it, eventually unlocking almost everything I wanted in each Attachment category, despite losing many shootouts with it.

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

RO933 .300 BLK = [N/A, Haven’t Unlocked yet sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.


MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

.38 SNUB = Seen in almost any cop movie between 1970 and 1990, this little guy fires fast, ‘moves’ smoothly and is nice and accurate – but it better be because you only get five shots to work with – and there are hardly any add-ons for it at all. *

.44 MAGNUM (Criminals) = The Classic is here, from Movies to Real Life mayhem, the “fourty-four” is a hand cannon of damage to all it gets pointed at, nuff’ said. *

.410 JURY = While not the fastest firing, this little bad boy is literally a hand-size-shotgun (it fires small shotgun-style shells) and since it is smaller than the Fourty-Four and The Eagle – but seems to blast out the damage even out to close-to-medium ranges – this weapon is fun-as-hell to run with. A Personal Favourite. **

.357 RS (Cops) = While still a “magnum” like The Fourty-Four, it doesn’t seem to do quite as much damage – or have the range the .44 MAGNUM has – but it has a bit more ammo at 8 rounds.

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

R0933 = With a high rate-of-fire and equipped with a few little add-ons ‘out of the box’, the RO933 ‘feels’ smooth and easy-to-use, even if it isn’t the fastest killer. *

AKS74U (Criminals) = With a notch up in damage and a couple notches up in accuracy from the RO933, the AKS74U ‘just feels right’. **

G36C (Cops) = Having not seen a “G36C” myself since BF3, this felt like it’s ‘little brother’ – a ‘smooth’ to maneuver with, compact, pretty accurate gun. *

SG553 (Cops) = With the highest average in-game stats than the other Carbines, this weapon should “kick criminal butt” – and that, it does (especially with some Add-ons). A Personal Favourite.**

CAR-556 = Packing a wallop of hit damage and feeling pretty accurate, even at range in short bursts, I have no idea why I can’t ‘get into’ using this gun more – perhaps it is the ‘harsh’ sound it makes? LOL *

ACWR = While the in-game stats show it as fairly inaccurate, I found the ACWR to do decent damage, ‘feel’ smooth to use – and do a nice bit of hurt to the enemy (even at range if you can compensate for the bit of recoil). *

AKM (Criminals) = If you can deal with the huge amount of recoil this gun has, it does seem to have a pretty accurate, crazy-damage, first shot and high-damage short bursts – other than that, it is actually ‘average’ in all stats, in-game.

M16A3 (Cops) = Accurate and with a fast firing rate, silence-able and reminiscent of “movie M16s”, there isn’t much to not like about this weapon. A Personal Favourite. **

M416 (Criminals) = This carbine ‘feels’ like it handles a lot smoother than the AKM, feeling more accurate as well, even though the in-game stats are comparable.

ARM = [N/A, Haven’t Unlocked Yet, sorry]

L85A2 = With a bit of recoil already, it is accentuated by the pre-loaded 4X scope it comes with – but if you are just ‘runnin-and-gunnin’ with it, it feels like a formidable weapon up close – it just seems to have accuracy problems (bullet spread) at anything other than point blank range.

MDC (Cops) = With what seems like a high amount of recoil and inaccuracy, the MDC doesn’t seem to live up to its’ stylish look – it ‘feels’ a bit worse than the L85A2, in regards to ‘handling’.

FAMAS = While quite inaccurate if you just ‘spray-n-pray’, aiming seems to help a lot with this rifle – it ‘felt’ a lot better too, after Unlocking the Extended Magazine – and it seems like it could only improve from there.

F2000 (Criminals) = This huge wall of metal feels like you are carrying a rocket launcher, but with its’ fast firing rate and decent accuracy, there’s not much to dislike about it – other than it doesn’t seem to ‘hit’ as hard as I would have expected . *

SAR-21 = In-game, the stats on this weapon are very ‘average’ – and it ‘felt’ that way, except for the accuracy which, especially if you can compensate for it, seems ‘high’, actually – and it only seemed to get better as I Unlocked more Attachments. *

RPK (Criminals) = With a large magazine size (50) and how this gun ‘feels’ heavy-hitting, while a bit inaccurate at first, I think it can be a formidable weapon after some Unlocks.

RPK-74 = While comparable to the RPK (of course), the ‘74 ‘felt’ a little more accurate, actually. *

AUG A3 = The AUG A3 already ‘felt’ pretty accurate, but with ‘included’ 4X scope and if you can compensate for the recoil, it is a pleasure to shoot – too bad it doesn’t seem to do high damage (but about a ‘medium’ amount). *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **


M110K5 = [N/A, Haven’t Unlocked Yet, sorry]



1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

92FS = Silence-able but not the fastest-shooting pistol, nor the most damaging – it does seem accurate though, if you can compensate for the recoil – maybe it would become something worthwhile after some Unlocks.

P226 (Cops) = Although fairly fast-firing, it is somewhat inaccurate – I would say it is the ‘slightly faster but less accurate version of the Criminals-only CZ-75’ if I had to compare it.

CZ-75 (Criminals) = Although fairly accurate, it is somewhat slow-firing – I would say it is the ‘slightly slower but more accurate version of the Cops-only P226’ if I had to compare it.

G17 = Nicely accurate and firing as fast as you can click, it seems, the G17 became an instant Personal Favourite. **

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever (other than the red dot sight it comes with). **

T62 CEW = Only one word for this one-hit-disabling “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

M67 FRAG = With decent range, ‘The Poison Apple’ does huge damage – I think it’s killzone has been increased since Beta – a room-clearer (as long as they are in line-of-sight), but you only get one. *

M18 SMOKE = While it doesn’t damage anyone, it does provide some good ‘cover’, as it blocks not only seeing people but also spotting.

M84 FLASHBANG = While sounding very useful at first, with the faster pace and highly mobile opponents in the convoluted spaces of Hardline, having an effect with this is rare – although I have had it used on me and have seen people not able to see well for the short time it is in effect (looking around or shooting aimlessly) – it is very rare to be helpful it seems, but it happens.

GAS GRENADE = Quite useful, as it blurs the view of the enemy (affecting their aim as well) and sometimes a killer (albeit slowly) – unless you want to be affected yourself, put on a Gas Mask Gadget. **

INCENDIARY GRENADE (Cops) = Create your own “Napalm Pond” with this grenade-of-fire, which has a good range and good ‘spread’ (the area of effect is fairly big) – the only drawback is that people have to stay in it for a bit to die and some could have Fire Resistance Masks to nullify it (but that is only the Operator Class and only if they have the Robbery Expansion/DLC). *

MOLOTOV (Criminals) = The ‘homemade’ version of the Incendiary Grenade, it has the same area of effect and does the same damage, it seems – and could be nullified by the FR Mask (but as above, that is only the Operators and only if they have the right Expansion/DLC). *

THROWING KNIFE = Slightly slower to deploy and slower to travel than expected, these types of knives are fairly heavy [in real life, I used to own one when I was younger] so they have some drop to account for; but your opponent will die when one knocks them over, making these little guys fun as heck to use. **

BASEBALL BAT (Criminals?) = No matter where you grew up in the world, you will know how to wield a wooden stick – which means this guy can come out fast and keep on swingin’ – do it from behind for a Takedown. *

POLICE BATON (Cops) = A staple of Authority worldwide and resembling the Japanese ‘Tonfa’, this bad boy will knock out a perp in two hits if you don’t take him down from behind. **

NIGHTSTICK (Cops) = Like a Police Baton without the little handle, the Nightstick feels fast to use, if a bit mundane to look at.

BLACKJACK (Cops) = Although still small and slim, this little guy feels ever-so-slightly slower than the other ‘sticks’, for some reason.

COLLAPSIBLE BATON (Cops) = I had no idea there would be such a long delay to deploy this little fella, since he’s so short…but don’t worry he becomes longer.

SHOVEL = As a farming tool, I feel that it has a sufficiently-long delay time to whip-it-out… and that’s enough double entendre for now.

GOLD CLUB (Criminals?) = Feeling like it wields ever-so-slightly slower than say, a baton or bat, it is still wicked fast – and you can do a non-lethal takedown (from behind), to Interrogate the enemy (finding out their positions on the map). *

LEAD PIPE (Criminals?) = Quick to draw and with a somewhat-satisfying ‘clunk’ when you hit an opponent, this guy is fast becoming a Personal Favourite. *

SLEDGE HAMMER (Criminals) = Slow and heavy to draw, this baby packs a mean punch once it does show its’ presence on the battlefield – a one-hit kill, it also takes down doors and crumbles thin walls with ease. *

BREACHING HAMMER (Cops) = The lawful version of a Sledgehammer, this big boy is also slow and heavy – but it forces others to ‘respect your authoritah’ once drawn as it one-hit-kills and takes down doors and thin walls with ease. *

CROWBAR (Criminals?) = If you’ve lived in any industrialized country for a time, you know what a crowbar is and what it can do – and while not seeming quite as quick-to-deploy as say, a bat or a baton, the muffled ‘donk’ sound it emits when hitting someone makes this weapon a pleasure to work with. **

KNIFE = Fast and deadly, nuff’ said.

SHANK = A weapon born out of necessity, the Shank is fast and deadly and other speedy and dangerous words… you get the point – or rather, they will. *

BOWIE KNIFE = This classic weapon, interestingly named after an owner (not its designer) feels ever-so-slightly slower than its’ other bladed brethren.

CARBON FIBER = Although sleek and stylish looking, there is an ever-so-slight delay to deploy this bad boy – but it does seem to have a unique takedown animation that can happen.

SCOUT = A fast knife that will cover your hands in blood if repeatedly wielded in a cluster of enemies.

SEAL = It feels ever-so-slightly slower than say, the Scout Knife, but it is still ‘wicked bad’, as it should be.

SURVIVAL = With an animation similar to the Bowie from the back and a seemingly-unique kill animation from above [that I have seen so far], this knife works well, even if it does seem ever-so-slightly slower than the other knives, for some reason.

TRENCH = With a ‘side animation’ similar to the Shank and a ‘front animation’ similar to the Bowie [that I have seen so far], the look of this fella makes it a touch more satisfying to kill with. *

ACB-90 (Criminals?) = With side-killing animations similar to the Shank and rear-killing animations similar to the Bowie [that I have seen so far], it does seem to deploy pretty quickly. *

DEVIL’S TOOTHPICK = The motions for using this ‘asylum invention’ on people are more ‘hectic’ and seem to shout “mayhem” (you stab less and hack more, it appears).

FIRE AXE (Cops?) = Live out your Team Fortress 2 “killing people who make W+M1 jokes” Pyro urges, or perhaps your childhood dream of being a “Firemans” (or a “Firelady”) with this slow-to-wield but ‘kick-axe’, axe. *

MACHETE = This traditional and practical knife seems to deploy quite slowly – although it does great damage and appears to kill in one hit [so far].

CLEAVER = While not as slow to use as say, the Machete or Axe, it is still “medium-slow”, a lethal takedown (even from behind) – but it doesn’t seem to have any ‘unique’ animations [that I have seen so far].

KARAMBIT = Fast and Deadly, there really is nothing else to say about this ‘little devil’ other than those two words – really, I’m not just being lazy here. *

INQUISITION SWORD = Slow and Heavy to wield – but a one hit kill as you overpower your foe – be sure to shout “There Can Be Only One” in real life when you use it for maximum fun-ness. **

When the Betrayal Expansion was released in March of 2016, a Battlelog Post stated: “Now that various weapons have been released to all classes with the base game update, you can pair a Mechanic with a sniper rifle, or an Enforcer with an SMG. You might not be as effective as you would with your class weapon, but the option is there.” Meaning, if you are utilizing a Weapon that is normally ‘outside’ of your Class, you will be using it with reduced effects!

Again, as stated above, I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. ‘slow and hard-hitting’ or perhaps ‘fast-shooting with lighter damage’, and so on) – hopefully this information will help you out in some way. Enjoy – get in there for the Double XP Event on now – and See You In The Game!

How to Optimize the Benefits of Vitamin D Supplementation

Vitamin D is constantly in the news lately and for good reason.    Optimal levels of Vitamin D have been linked to a host of benefits including prevention and treatment of many key diseases ranging from Osteoporosis to improved heart health with reduction in heart attack risk to prevention of many different types of cancer.
The ideal way to get optimal levels of Vitamin D is to let your body create it through Safe Sun Exposure (see previous blog on this subject here:  http://workoutanytime.blogspot.com/2016/08/the-facts-on-safe-sun-exposure-and.html  However this is easier said then done, and too much sun is clearly a strong risk factor for skin cancer!      Enter Vitamin D supplementation.
The amount and form of Vitamin D supplementation has changed substantially based on lots of emerging research.    The form that should be taken is Vitamin D-3 NOT D-2 form and all experts agree on this!     However when it comes to dosage things get much trickier.      The confusion comes because Vitamin D is really a powerful compound and functions as a hormone in the body.    As such it has profound impact on virtually every system in the body.    In addition you can overdose on Vitamin D supplements so more is NOT always better!
Ideally you should order a blood test and test your levels.    The test you want is called a 25(OH)D blood test and is offered by all major labs.   You can either ask your doctor to order this test for you OR you can order an in-home test.   You just prick your finger and put a drop of bloo on the enclosed paper and send back in to the labs.    You can also your own blood test online and go to a lab to have blood drawn in the same way your doctor orders the test.   For more information on testing go here:  https://www.vitamindcouncil.org/testkit/?gclid=Cj0KCQjwh_bLBRDeARIsAH4ZYEPhv0MVkO5_S7USZZ8bwVlt5A3vPWGbBFFIbJiB8Wtva0x-IDH7UmQaAlGkEALw_wcB#
Ideal versus Acceptable Blood Levels of Vitamin D

There is a big difference between what is considered “acceptable” or okay and ideal blood levels.   Here are the classifications of different blood levels of Vitamin D. according to the Vitamin D Council:
0 – 30 ng/ML is very low and considered a deficiency
30 – 39 ng/ML is better but still insufficient for optimal health and disease prevention.
40 – 100 ng/ML is optimal
Above 150 ng/ML is toxic!
The key is to test and if low take a supplement then retest 2 – 3 months after regular vitamin d use because each person is different in how much supplementation they need based on many factors including sun exposure and skin type.     The RDA for Vitamin D for infants is 400iu.    For Children 1 – 13 and adults through age 70 the RDA is 600iu and for those over 70 the RDA is 800iu.
Unfortunately, this is way too low to get many people into the sufficient much less optimal range so testing is really worthwhile.   In many cases people need 4,000 – 10,000 or more iu’s per day for at least a month to get where they need to be for optimal health!
Preventing Vitamin D Toxicity through the Co-Administration of Vitamin K-2

Like many vitamins Vitamin D has a co-factor or other vitamin that helps it perform its function better and in a more balanced fashion, and that other vitamin is Vitamin K-2 (not to be confused with K-1 found in many plants).    In an ideal world, you can get all the Vitamin K-1 you need from eating plenty of green, leafy vegetables, and your body can turn it into K-2.   Unfortunately, this conversion is lacking in many people.
More importantly K-2 is not easily toxic and can be taken with Vitamin D.    K-2 is best taken as a supplement as MK-7 version which has been heavily researched and shown to improve bone health and prevent arterial calcification which can potentially occur with too much Vitamin D.     For a more complete understanding behind how K-2 works with Vitamin D and why it is a great idea to take the MK-7 form of K-2 with Vitamin D check out this article from Dr. Mercola:   http://articles.mercola.com/sites/articles/archive/2011/03/26/the-delicate-dance-between-vitamins-d-and-k.aspx

Taking 100 – 200 mcg per day of Vitamin K-2 will help optimize the effects of Vitamin D and minimize risks associated with Vitamin D Supplementation.

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

You can view the full article here. 

Choosing a Sensible Diet, Healthy Appetite

So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

Every time we open our mouths to eat we make an important decision concerning our future.

Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

Diet Start

What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

Don’t Be a Faddist

On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

Rules for Choosing a Sensible Diet

Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

[This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

[NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
(Click to see Full Size)

What is The Train?

‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

Killing the Boar champion while on the Train in Queensdale
(Click to see Full Size)

If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

[On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

Killing the Troll champion while on the Train in Queensdale
(Click to see Full Size)

How does one ‘get on’ The Train? 

First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
(Click to see Full Size)

The Route that The Train takes usually runs like this (repeatedly):

  • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
  • Kill the Boar champion in the hills there, NW of the Hunting Lodge
  • Fast Travel to the Vale Waypont and head into the caves just to the west
  • Kill the Troll champion inside the caves of Altar’s Windings
  • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
  • Kill the Rotting Ancient Oakheart champion at the forest’s edge
  • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
  • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
  • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

Killing the Oak champion while on the Train in Queensdale
(Click to see Full Size)

A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

Killing the Spider champion while on the Train in Queensdale
(Click to see Full Size)
That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

[UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
[UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
[UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
Boar-Troll-Bandit-Oak
I am working on a new, updated version of the map and will insert it here when finished.
For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

See You In The Game!

No Backtracking

No Backtracking principles

This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

  • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
  • Break totally with bad habits made in the past
  • Never return to yo-yo dieting
  • Find a healthy attitude to food and a viable eating plan for the rest of your life.

No Backtracking rules

During this phase you need to:

  • Increase your daily carb intake by no more than 10g (1/3oz) each week
  • Add new foods one at a time
  • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

Diet Start

  • Drop back to the next-lowest level of carbohydrate intake if you gain weight
  • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
  • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

Make this diet the one that works

Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

A template for life

Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

  • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
  • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
  • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
  • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
  • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
  • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

Currently June (?!)

Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

Here we go…

Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

Now I just need to hold on for Monday when my precious new toy will arrive!

Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

,
Have a great June, everyone!

First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

[This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

Google Play App – Screen Recorder by Kimcy929

Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

“…Video Is Playing On External Display…”





Now, I had not enabled any such option, nor did I connect any External Displays…

I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-